Library

Parts people generate with SpeakCAD

1415 everyday 3D-printable parts, each with the dimensions that matter and a prompt you can paste. Nothing here is a fixed file: describe your measurements and the model is built for you, in your browser.

Ready-made models you can open free (824)

These parts already have a model. Open one in a free account (no card), turn it in 3D and change its numbers in the viewer. Download it free as STL or 3MF. AI changes use 2 credits per request: Maker gives 50 credits a month for $7.99, cancel anytime.

Sloped wrist rest for mechanical keyboard, 3D printable part

Sloped wrist rest for mechanical keyboardA palm rest that matches the front height of a mechanical keyboard so your wrists stay level while typing.

Stackable drawer organizer tray with dividers, 3D printable part

Stackable drawer organizer tray with dividersA shallow open tray that drops into a desk or kitchen drawer and splits it into compartments for pens, batteries, clips and other loose items.

Small parts sorting bins with label slot, 3D printable part

Small parts sorting bins with label slotOpen-fronted bins for screws, nuts, LEDs, beads or any tiny hardware that otherwise ends up loose in a jar.

SD card and USB stick desktop caddy, 3D printable part

SD card and USB stick desktop caddyA compact block with angled slots that hold SD cards, microSD adapters and USB flash drives upright so the labels face you.

AA and AAA battery storage box with lid, 3D printable part

AA and AAA battery storage box with lidA two-level case that stores fresh cells in rows and keeps the used ones separate.

Charging cable organizer with wrap posts, 3D printable part

Charging cable organizer with wrap postsA flat plate with staggered posts that lets you coil USB-C, Lightning and micro-USB cables in figure eights and park the connectors in labelled pockets so th…

Jewelry tray with ring bars and earring holes, 3D printable part

Jewelry tray with ring bars and earring holesA dresser tray combining a ring bar section, a grid of 1.5 mm holes for stud earrings, and a shallow well for bracelets and necklaces.

Weekly pill organizer with hinged lids, 3D printable part

Weekly pill organizer with hinged lidsSeven compartments, one per day, each with its own print-in-place hinged lid that snaps shut with a small catch.

Tiered thread spool rack for sewing table, 3D printable part

Tiered thread spool rack for sewing tableA stepped rack that holds sewing thread spools on angled pegs so the labels stay visible and the thread ends do not unravel into each other.

Makeup brush holder with divided cups, 3D printable part

Makeup brush holder with divided cupsA tall cup split into three sections of different heights so face brushes, eye brushes and eyeliner pencils each stand at a useful height without disappearing.

Entryway catch-all tray for keys and wallet, 3D printable part

Entryway catch-all tray for keys and walletA low rectangular dish for the hallway table that corrals keys, wallet, earbuds and coins as you walk in.

Glasses stand for several pairs of spectacles, 3D printable part

Glasses stand for several pairs of spectaclesA tiered stand that holds reading glasses, sunglasses and spare frames open-armed, lenses facing out and never touching a surface.

Every part is listed on its category page, ready-made models first.

Community models

Free parts published by other SpeakCAD makers. Get one and change any size before you print.

Round Christmas Ornament, 3D printable model

Round Christmas OrnamentOther · 76 × 76 × 2 mm

No ratings yetby Dave

3030 Quarter-Round End Cap, 3D printable model

3030 Quarter-Round End CapOther · 30 × 30 × 13 mm

No ratings yetby Markwatling

new box indian bac, 3D printable model

new box indian bacOther · 204 × 371 × 77 mm

No ratings yetby Littledreame

NerdMiner V2 Stand, 3D printable model

NerdMiner V2 StandBrackets & mounts · 93 × 44 × 49 mm

No ratings yetby Donald

Locking grommet, 3D printable model

Locking grommetOther · 8 × 8 × 8 mm

No ratings yetby Donald

Coaster set with stand, 3D printable model

Coaster set with standKitchen & home · 213 × 105 × 29 mm

No ratings yetby Jephoto71

See all 74 community models →

Organizers & storage

Drawer inserts, bins, trays and holders that fit a measured space.

25 mm French-cleat safety-glasses bin, 3D printable part

25 mm French-cleat safety-glasses binA 120 × 80 × 60 mm bin on a 25 mm French cleat that holds two pairs of safety glasses and a pack of earplugs.

AA and AAA battery storage box with lid, 3D printable part

AA and AAA battery storage box with lidA two-level case that stores fresh cells in rows and keeps the used ones separate.

Apple TV Siri Remote 3rd-gen tray, 3D printable part

Apple TV Siri Remote 3rd-gen trayA tray that parks a 3rd-gen Siri Remote (about 136 × 35 × 9 mm) plus a spare USB-C cable so the remote does not vanish between sofa cushions.

Bambu Lab H2D build-plate wall rack, 3D printable part

Bambu Lab H2D build-plate wall rackA wall rack that stores three H2D / 350 mm class build plates on 8 mm lips with 6 mm gaps so the textured side does not scratch.

Bose QC Ultra 2 travel case insert, 3D printable part

Bose QC Ultra 2 travel case insertA drop-in insert that turns a generic hard case into a Bose QC Ultra 2 (about 170 × 170 × 80 mm folded) nest with a 40 × 20 mm well for the USB-C cable and a…

Boss pedal patch cable and 9V power lead organizer, 3D printable part

Boss pedal patch cable and 9V power lead organizerA gig-bag tray that keeps the small stuff behind a pedalboard sorted: 15 cm patch cables, 5.5 x 2.1 mm 9 V daisy-chain leads for Boss and Strymon pedals, spa…

Canon LP-E6 battery holder with SD card slots, 3D printable part

Canon LP-E6 battery holder with SD card slotsA camera-bag organizer that carries three Canon LP-E6, LP-E6N or LP-E6NH batteries, the 38.4 x 21 x 56.8 mm pack shared by the EOS R6, R6 Mark II, R5 and 5D…

Charging cable organizer with wrap posts, 3D printable part

Charging cable organizer with wrap postsA flat plate with staggered posts that lets you coil USB-C, Lightning and micro-USB cables in figure eights and park the connectors in labelled pockets so th…

DeWalt TSTAK VI oscillating-tool insert, 3D printable part

DeWalt TSTAK VI oscillating-tool insertAn insert for a TSTAK VI deep box that holds a DCS356, eight blades in 2 mm slots, and the charger.

Dunlop Tortex pick dispenser box for 30 picks, 3D printable part

Dunlop Tortex pick dispenser box for 30 picksA spring-loaded dispenser that stacks 30 standard 351-shape guitar picks such as Dunlop Tortex, Jazz III XL, Fender 351 or Ernie Ball Everlast, and pushes th…

Dyson Airwrap smoothing-brush caddy, 3D printable part

Dyson Airwrap smoothing-brush caddyA caddy that holds the firm and soft Airwrap smoothing brushes plus the flyaway attachment in labelled wells so the magnets do not click together in a drawer.

Dyson Big+Quiet Formaldehyde remote cradle, 3D printable part

Dyson Big+Quiet Formaldehyde remote cradleA cradle that holds the larger Big+Quiet Formaldehyde remote (about 130 × 50 × 14 mm) on the top of the cylinder so it does not slide off the curved lid.

See all 179 →

Brackets & mounts

Wall brackets, clips, hooks and mounts for pipes, shelves and devices.

25 mm French-cleat cordless-drill holder, 3D printable part

25 mm French-cleat cordless-drill holderA French-cleat cradle for an 18V drill with a 50 mm handle saddle and a 20 mm battery rest, cut for a 25 mm cleat.

Air-hose reel wall guide 8 mm, 3D printable part

Air-hose reel wall guide 8 mmA wall guide that keeps an 8 mm ID air hose from rubbing the reel cheek, 40 mm ring with a 4.5 mm hole pair.

AirPods Max 2 wall hook with braided cable slot, 3D printable part

AirPods Max 2 wall hook with braided cable slotA wall hook that holds AirPods Max 2 (about 188 × 168 × 83 mm) by the headband with a 20 mm padded saddle and a 8 × 40 mm slot underneath for the braided USB…

Apple TV 4K 3rd gen HDMI shelf, 3D printable part

Apple TV 4K 3rd gen HDMI shelfA 100 mm shelf that hides a 3rd-gen Apple TV 4K behind a TV with a 16 mm HDMI/power cutout and two 4.5 mm holes.

Aqara Hub M3 under-shelf clip, 3D printable part

Aqara Hub M3 under-shelf clipA clip that hides an Aqara Hub M3 under a 12–24 mm shelf with the USB-C facing out.

Aqara Presence Sensor FP2 45-degree corner bracket, 3D printable part

Aqara Presence Sensor FP2 45-degree corner bracketA corner bracket that aims an Aqara FP2 presence sensor (about 64 × 64 × 28 mm) at 45 degrees across a room.

DJI Osmo Pocket 3 desk cradle with tripod thread, 3D printable part

DJI Osmo Pocket 3 desk cradle with tripod threadA weighted desk cradle for a DJI Osmo Pocket 3 (about 140 × 42 × 34 mm) with a 1/4-20 brass-insert boss underneath and a 16 mm well that the handle drops into.

Dyson Gen5detect crevice-tool clip, 3D printable part

Dyson Gen5detect crevice-tool clipA clip that holds the Gen5detect crevice tool on the wand so it does not live in the other room.

Dyson HP09 remote wall clip, 3D printable part

Dyson HP09 remote wall clipA clip that hangs the HP09 Formaldehyde remote next to a light switch so it is not the curved thing on the floor.

Dyson V10 cyclone tool rail, 3D printable part

Dyson V10 cyclone tool railA rail that hangs four V10 click-in tools beside the official wall dock so the crevice, combination and mini-motorhead are not on the floor.

Dyson V15 Detect wand wall holster, 3D printable part

Dyson V15 Detect wand wall holsterA wall holster that parks a V15 Detect wand and two tools next to the official dock, which only holds one.

Dyson V8 Absolute wand wall holster, 3D printable part

Dyson V8 Absolute wand wall holsterA wall holster that parks a V8 Absolute wand and three click-in tools so you are not buying Dyson's official dock.

See all 246 →

Enclosures & cases

Boxes and lids for PCBs, sensors, batteries and small electronics.

ESP32-S3 SuperMini case with USB-C, 3D printable part

ESP32-S3 SuperMini case with USB-CA snap case for an ESP32-S3 SuperMini with a USB-C window, two GPIO slots and 2 mm vents.

Flipper Zero Wi-Fi devboard case, 3D printable part

Flipper Zero Wi-Fi devboard caseA slim case that covers a Flipper Wi-Fi devboard GPIO without blocking the SMA, snap fit, 1.2 mm PETG.

Home Assistant Yellow DIN-rail clip, 3D printable part

Home Assistant Yellow DIN-rail clipA clip that hangs a Home Assistant Yellow on a 35 mm DIN rail with 0.3 mm snap.

Logitech MX Anywhere 4 travel case, 3D printable part

Logitech MX Anywhere 4 travel caseA two-part case for an MX Anywhere 4, 110 × 70 × 40 mm with 0.4 mm clearance and a 8 mm dongle well.

Matter Thread border-router case for nRF, 3D printable part

Matter Thread border-router case for nRFA vented case for an nRF52840 Thread border-router board with SMA and USB-C cutouts.

Oura Ring 4 charger travel capsule, 3D printable part

Oura Ring 4 charger travel capsuleA 40 mm diameter capsule that holds an Oura Ring 4 on its official puck plus 40 cm of USB-C cable.

Raspberry Pi 5 Hailo HAT case, 3D printable part

Raspberry Pi 5 Hailo HAT caseA case that clears a Pi 5 with the Hailo AI HAT, 30 mm extra height, GPIO slot and 40 mm fan vents.

Shelly 2PM Gen3 DIN-rail adapter, 3D printable part

Shelly 2PM Gen3 DIN-rail adapterAn adapter that snaps a Shelly 2PM Gen3 onto a 35 mm DIN rail with 0.3 mm clearance.

Sonoff MINIR4M junction-box insert, 3D printable part

Sonoff MINIR4M junction-box insertAn insert that holds a MINIR4M in a 80 × 80 mm junction box with strain-relief slots.

Adafruit Feather case for a FeatherWing stackAn enclosure built around the Adafruit Feather form factor: 50.8 x 22.8 mm boards with 2.5 mm mounting holes on a 45.72 x 17.78 mm pattern.

AirPods Pro 2 case belt clip with carabiner holeA snap-on sleeve for the AirPods Pro 2 charging case (60.6 x 45.2 x 21.7 mm) with a spring belt clip on the back and a 6 mm carabiner hole on top, so the ear…

AirTag dog collar holder for 20 mm collarsA screw-closed AirTag holder that slides onto a 20 mm dog collar and sits flat against the neck, so the tag does not dangle, jingle or snag in bushes.

See all 107 →

Adapters & couplers

Hose, vacuum, tripod and thread adapters between two standards.

Canon EOS R6 hot shoe dual cold shoe bar, 3D printable part

Canon EOS R6 hot shoe dual cold shoe barA T-shaped bar that slides into the hot shoe of a Canon EOS R6, R6 Mark II or R50 and offers two cold shoes side by side, so a Rode VideoMic GO II and a smal…

DJI Action 5 Pro chest-mount adapter, 3D printable part

DJI Action 5 Pro chest-mount adapterAn adapter that puts a DJI Action 5 Pro (about 42 × 33 × 33 mm with the frame) onto a standard 3-prong GoPro chest mount.

DJI Mic 2 receiver cold-shoe hood, 3D printable part

DJI Mic 2 receiver cold-shoe hoodA hood that shades a Mic 2 receiver screen on a cold shoe, 40 × 30 × 18 mm.

DJI Mini 4 Pro landing gear extensions clip-on, 3D printable part

DJI Mini 4 Pro landing gear extensions clip-onA set of four clip-on leg extensions for the DJI Mini 4 Pro and Mini 3 Pro that raise the airframe 35 mm so the downward vision sensors and gimbal stay out o…

Dust-port adapter 36 mm to 27 mm Festool, 3D printable part

Dust-port adapter 36 mm to 27 mm FestoolA stepped adapter from a 36 mm shop-vac cuff to a 27 mm Festool hose with 0.2 mm tapers so both sides stay put.

Godox V1 flash foot stand with 1/4 inch thread, 3D printable part

Godox V1 flash foot stand with 1/4 inch threadA replacement mini stand for a Godox V1, V860III or TT685 speedlight that has lost the plastic foot it shipped with.

GoPro Hero 13 bite-mount spacer, 3D printable part

GoPro Hero 13 bite-mount spacerA 8 mm spacer that moves a Hero 13 off a bite mount so the Media Mod does not hit your chin.

GoPro Hero 13 Media Mod cold-shoe bar, 3D printable part

GoPro Hero 13 Media Mod cold-shoe barA dual cold-shoe bar that bolts onto a GoPro Hero 13 Media Mod (about 80 mm wide) so a wireless mic and a light sit on the same axis.

Insta360 X5 invisible-selfie adapter, 3D printable part

Insta360 X5 invisible-selfie adapterAn adapter that puts an X5 on a 1/4-20 selfie stick at the official invisible-selfie angle, 15 degrees.

JOBY GorillaPod 3K phone saddle, 3D printable part

JOBY GorillaPod 3K phone saddleA saddle that puts a 70–85 mm phone on a GorillaPod 3K ball head with a 1/4-20 insert.

Manfrotto 200PL plate to Arca-Swiss dovetail adapter, 3D printable part

Manfrotto 200PL plate to Arca-Swiss dovetail adapterA block that screws to the bottom of a Manfrotto 200PL or 200PL-PRO quick-release plate and gives it a 38 mm Arca-Swiss dovetail, so a camera that lives on a…

Ortlieb Ultimate 6 bar adapter 31.8 mm, 3D printable part

Ortlieb Ultimate 6 bar adapter 31.8 mmAn adapter that lets an Ultimate 6 mount clamp a 31.8 mm bar instead of the 25.4 it assumes, 4 mm shim pair.

Desk & office

Stands, cable management, pen holders and monitor accessories.

Adhesive desk cable clip set, 3D printable part

Adhesive desk cable clip setA set of low-profile clips that stick to the edge of a desk and hold charging cables.

AirPods 4 ANC desk charging stand, 3D printable part

AirPods 4 ANC desk charging standA small desk stand that holds an AirPods 4 ANC case (about 50 × 50 × 21 mm) at 20 degrees with the lid able to open.

AirPods Pro 3 desk charging well, 3D printable part

AirPods Pro 3 desk charging wellA well that parks an AirPods Pro 3 case (about 61 × 46 × 22 mm) on its USB-C or MagSafe side so the stem LEDs stay visible.

Airspy HF+ Discovery desk stand, 3D printable part

Airspy HF+ Discovery desk standA stand that holds an HF+ Discovery at 20 degrees with SMA clearance and a 14 mm USB slot.

Akai MPK Mini MK3 keyboard stand with laptop shelf, 3D printable part

Akai MPK Mini MK3 keyboard stand with laptop shelfA two-tier stand that lifts an Akai MPK Mini MK3 or MPK Mini Plus (318 x 181 x 44 mm) 20 mm off the desk at a 10 degree angle and raises a 13 to 16 inch lapt…

AKAI MPK Mini Plus stand, 3D printable part

AKAI MPK Mini Plus standA 12 degree stand for an MPK Mini Plus that clears the extra drum pads, 220 mm span in two halves.

Angled business card holder for desk, 3D printable part

Angled business card holder for deskA tilted display block that fans a stack of up to 30 business cards forward so visitors can take one cleanly.

Angled desk phone stand with cable slot, 3D printable part

Angled desk phone stand with cable slotA 60 degree cradle that holds a phone upright for video calls while a charging cable passes up through a slot in the base.

Apple Pencil Pro MagSafe pair tray, 3D printable part

Apple Pencil Pro MagSafe pair trayA tray that parks an Apple Pencil Pro and a USB-C Pencil side by side with 9 mm saddles and a 12 mm cap well.

Apple Watch Series 11 nightstand angle wedge, 3D printable part

Apple Watch Series 11 nightstand angle wedgeA 15 degree wedge that sits under an official Series 11 charger puck so the 46 mm watch face is readable from the pillow.

Apple Watch Ultra 3 nightstand charger dock, 3D printable part

Apple Watch Ultra 3 nightstand charger dockA nightstand dock that holds an Apple Watch Ultra 3 (about 49 mm case, 12 mm thick) on its magnetic charger at 15 degrees, with a 80 × 20 mm trough behind fo…

Aqara Cube T1 Pro desk cradle, 3D printable part

Aqara Cube T1 Pro desk cradleA 50 mm cradle that parks an Aqara Cube T1 Pro at 15 degrees so it does not roll off a desk, with a 1 mm lip.

See all 172 →

Kitchen & home

Household fixes: knobs, feet, spacers, hangers and lids.

AeroPress Go travel funnel cap, 3D printable part

AeroPress Go travel funnel capA funnel cap that replaces the AeroPress Go's drinking lid so you can fill the chamber from a hotel kettle without spilling.

Angled spice jar insert for kitchen drawer, 3D printable part

Angled spice jar insert for kitchen drawerA stepped insert that lays spice jars on their backs in a drawer so every label is readable.

Bin bag roll dispenser for cabinet door, 3D printable part

Bin bag roll dispenser for cabinet doorA slim box that holds a roll of bin bags inside a cabinet door and feeds one out through a slot.

Breville Barista Pro 54 mm dosing funnel, 3D printable part

Breville Barista Pro 54 mm dosing funnelA 54 mm dosing funnel that sits on a Barista Pro portafilter with a 55 mm ID and a 12 mm wall so a WDT tool does not flick grounds.

Coffee pod holder tray for a drawer or counter, 3D printable part

Coffee pod holder tray for a drawer or counterA tray that stands coffee capsules in tidy rows so you can see how many are left and grab a flavour without digging through a bag.

Cosori Dual Blaze basket-divider clip, 3D printable part

Cosori Dual Blaze basket-divider clipA clip that holds a silicone liner halfway across a Dual Blaze basket so two foods do not mix.

Cotton swab dispenser with lift lid, 3D printable part

Cotton swab dispenser with lift lidA bathroom box that stores cotton swabs upright.

Cutlery tray sized to your kitchen drawer, 3D printable part

Cutlery tray sized to your kitchen drawerA five-section cutlery tray built to the exact internal width and depth of a kitchen drawer so it does not slide about or waste space at the sides.

Dreame L20 Ultra mop drying rack, 3D printable part

Dreame L20 Ultra mop drying rackA rack that holds two L20 Ultra mop pads upright so they dry beside the dock, 180 × 40 × 80 mm with 6 mm slots.

Dyson Airwrap Complete Long stand, 3D printable part

Dyson Airwrap Complete Long standA counter stand that holds a Dyson Airwrap Complete Long (about 41 mm handle, 270 mm long) barrel-up so the cord does not yank it over.

Dyson Airwrap i.d. barrel wall rack, 3D printable part

Dyson Airwrap i.d. barrel wall rackA wall rack that parks the four Airwrap i.d. barrels (30 and 40 mm, left and right) plus the smoothing brush so they dry without rolling off a shelf.

Dyson HP07 filter drying rack, 3D printable part

Dyson HP07 filter drying rackA rack that stands a washed HP07 HEPA+carbon filter (about 220 mm tall, 180 mm wide) on edge so it dries before you drop it back in the tower.

Tools & jigs

Drill guides, sanding blocks, soldering aids and workshop jigs.

20 mm bench dog for Festool MFT, 3D printable part

20 mm bench dog for Festool MFTA 20 mm bench dog 25 mm tall with a 0.1 mm taper so it drops into an MFT/3 hole and a 6 mm through-hole for a hold-down.

Angle-grinder cutting stand 115 mm, 3D printable part

Angle-grinder cutting stand 115 mmA stand that holds a 115 mm angle grinder at 90 degrees for chopping 20 mm tube, with a 40 mm vise and a 6 mm pin hinge.

AnkerMake M5C filament runout funnel, 3D printable part

AnkerMake M5C filament runout funnelA funnel that guides a new 1.75 mm end into the M5C PTFE inlet after a runout so you do not dismantle the head.

Bambu Lab A1 AMS Lite PTFE guide clip, 3D printable part

Bambu Lab A1 AMS Lite PTFE guide clipA clip that holds four 4 mm PTFE tubes in a tidy arc above a Bambu Lab A1 AMS Lite so they do not kink at the hub.

Bambu Lab P1S poop-chute extension bin, 3D printable part

Bambu Lab P1S poop-chute extension binAn extension that carries P1S purge poop 80 mm further forward into a 90 × 70 × 50 mm bin so it does not pile against the door.

Bench-cookie set 60 mm non-slip, 3D printable part

Bench-cookie set 60 mm non-slipFour 60 × 12 mm bench cookies with a 2 mm TPU pad recess on each face so a workpiece stays put for sanding.

Chain-wear hook 0.5 and 0.75 percent, 3D printable part

Chain-wear hook 0.5 and 0.75 percentA hook that reads 0.5 and 0.75 percent chain wear on 11–13 speed chains, 2 mm thick with labelled ends.

Chisel edge-guard set 6, 12, 19 and 25 mm, 3D printable part

Chisel edge-guard set 6, 12, 19 and 25 mmFour snap-on edge guards for bench chisels, 6–25 mm, 1 mm TPU walls and a 0.4 mm lip over the bevel.

Crosscut-sled runner for 19 mm mitre slots, 3D printable part

Crosscut-sled runner for 19 mm mitre slotsA 19 × 10 × 400 mm runner that fits European 19 mm mitre slots with 0.1 mm side shims you snip to tune.

Dowel centre-finder set 6, 8 and 10 mm, 3D printable part

Dowel centre-finder set 6, 8 and 10 mmThree centre-finders that mark matching dowel holes: 6, 8 and 10 mm bodies with a 1.5 mm centre pin.

Drill-press vice jaw pads 100 mm, 3D printable part

Drill-press vice jaw pads 100 mmA pair of 100 × 25 × 8 mm jaw pads with a 4 mm V-groove for round stock and 2 mm through-holes matching a typical 100 mm drill-press vice.

Elegoo Centauri Carbon purge bucket, 3D printable part

Elegoo Centauri Carbon purge bucketA 110 × 70 × 50 mm bucket that clips onto the Centauri Carbon's right rail and catches purge before it hits the carbon-fibre bed.

Replacement parts

Re-created parts for appliances, furniture and gadgets.

Combination-square head replacement 300 mm, 3D printable part

Combination-square head replacement 300 mmA replacement head for a 300 mm combination square with a 1 mm rule slot, a 45 degree face, and an M5 lock.

Digital-caliper SR44 battery-door replacement, 3D printable part

Digital-caliper SR44 battery-door replacementA snap-in battery door for a 150 mm digital caliper that takes an SR44 / 357 cell, 16 mm across with a 0.6 mm lip.

ecobee Smart Thermostat Enhanced wall shim, 3D printable part

ecobee Smart Thermostat Enhanced wall shimA 6–12 mm stepped shim that sits behind an ecobee Smart Thermostat Enhanced (about 109 mm round) so the unit sits flush on a tiled wall.

Framework Laptop 16 expansion-bay cover, 3D printable part

Framework Laptop 16 expansion-bay coverA blank cover for a Framework 16 expansion bay when the GPU module is out, 150 × 20 × 8 mm with the official clips.

IKEA ALEX drawer-stop clip pair, 3D printable part

IKEA ALEX drawer-stop clip pairA pair of clips that stop an ALEX drawer from rolling all the way out on a slightly uneven floor.

IKEA BESTÅ glass-door soft bump, 3D printable part

IKEA BESTÅ glass-door soft bumpA 8 mm silicone-style bump that sticks on a BESTÅ glass door so it does not slap the frame.

IKEA KALLAX 40 mm foot riser with caster boss, 3D printable part

IKEA KALLAX 40 mm foot riser with caster bossA 40 mm riser that replaces a KALLAX foot and adds a 10 mm boss for a plate caster so the unit rolls.

IKEA METOD hinge spacer 2 mm, 3D printable part

IKEA METOD hinge spacer 2 mmA 2 mm spacer that sits behind a METOD hinge plate so a warped cabinet still closes.

IKEA SEKTION drawer soft-close clip, 3D printable part

IKEA SEKTION drawer soft-close clipA replacement clip that holds a SEKTION drawer damper on the runner, 18 × 10 × 8 mm with a 2 mm hook.

Manfrotto Befree centre-column hook, 3D printable part

Manfrotto Befree centre-column hookA hook that hangs a bag from a Befree centre column so the tripod stays put in wind, 12 mm snap.

Marking-gauge wheel-fence replacement, 3D printable part

Marking-gauge wheel-fence replacementA 40 mm fence that replaces a cracked marking-gauge head, 20 mm stem bore with an M5 pinch, and a 0.4 mm wheel slot.

Nanoleaf Shapes 10 mm corner spacer, 3D printable part

Nanoleaf Shapes 10 mm corner spacerA 10 mm spacer that sits behind a Shapes panel so a corner that is out of plane still clicks.

See all 158 →

Hobby & gaming

Dice towers, miniature bases, card holders and controller stands.

8BitDo Ultimate 2 charging-dock riser, 3D printable part

8BitDo Ultimate 2 charging-dock riserA 15 mm riser under an Ultimate 2 dock so a thicker aftermarket grip still seats on the pogo pins.

Apple Vision Pro 2 Light Seal stand, 3D printable part

Apple Vision Pro 2 Light Seal standA desk stand that holds Apple Vision Pro 2 (about 200 mm wide) on its Light Seal so the displays stay off the desk.

Apple Vision Pro battery-pack belt clip, 3D printable part

Apple Vision Pro battery-pack belt clipA clip that parks the Vision Pro battery pack on a 40 mm belt so the cable does not yank the headset, 70 × 40 mm saddle.

Apple Vision Pro travel battery pocket, 3D printable part

Apple Vision Pro travel battery pocketA pocket that straps the Vision Pro battery pack (about 70 × 40 × 20 mm) to the official travel case so the cable does not yank the headset in a bag.

ASUS ROG Ally X grip shell, 3D printable part

ASUS ROG Ally X grip shellA two-part shell that thickens Ally X grips by 8 mm without covering vents or the rear buttons.

AYANEO KUN travel stand, 3D printable part

AYANEO KUN travel standA folding stand that holds an AYANEO KUN at 50 degrees with a 14 mm USB-C slot, two pieces on a 6 mm pin.

Boss RC-5 pedalboard riser, 3D printable part

Boss RC-5 pedalboard riserA 20 mm riser that lifts an RC-5 so you can hit it behind a row of 55 mm pedals, 75 × 65 mm with 3M-pad recesses.

Citadel paint pot rack for 26 mm pots, 3D printable part

Citadel paint pot rack for 26 mm potsA three-tier stepped rack that holds 30 Games Workshop Citadel paint pots, the 12 ml flip-top pots that are about 26 mm across and 32 mm tall, tilted 15 degr…

D&D dice tower shaped like a dungeon turret, 3D printable part

D&D dice tower shaped like a dungeon turretA crenellated stone turret that doubles as a dice tower for Dungeons & Dragons, Pathfinder and Warhammer sessions.

DJI Mini 5 Pro prop holder, 3D printable part

DJI Mini 5 Pro prop holderA holder that clips Mini 5 Pro props in pairs so they do not bend in a bag, 80 × 20 × 12 mm.

DJI Neo 2 pocket launch pad, 3D printable part

DJI Neo 2 pocket launch padA 120 mm pad that gives a Neo 2 a clean launch off gravel with 8 mm lips.

DualSense Edge back-paddle rest, 3D printable part

DualSense Edge back-paddle restA rest that holds a DualSense Edge face-down without bending the back paddles, two 8 mm clearance wells.

See all 119 →

Garden & outdoor

Planters, hose guides, label stakes and bike accessories.

Apidura Expedition drybag roll clip, 3D printable part

Apidura Expedition drybag roll clipA clip that keeps an Expedition drybag roll from unrolling, 40 mm jaws with a 2 mm TPU lip.

Black Diamond Spot 400 helmet clip, 3D printable part

Black Diamond Spot 400 helmet clipA clip that puts a Spot 400 on a vented helmet without the official kit, 18 mm vent snap and a 25 mm lamp saddle.

Brompton C Line front-carrier block cover, 3D printable part

Brompton C Line front-carrier block coverA cover that keeps grit out of a C Line front-carrier block when the bag is off, 40 × 30 × 15 mm with a 2 mm snap.

Garmin Edge 1050 out-front mount 31.8 mm, 3D printable part

Garmin Edge 1050 out-front mount 31.8 mmAn out-front mount for an Edge 1050 on a 31.8 mm bar with the quarter-turn head and a 20 mm GoPro boss underneath.

Garmin inReach Mini 2 sternum mount, 3D printable part

Garmin inReach Mini 2 sternum mountA mount that puts an inReach Mini 2 on a 25 mm sternum strap with the antenna up, 28 mm well and a 2 mm webbing slot.

Hammerhead Karoo 3 out-front mount, 3D printable part

Hammerhead Karoo 3 out-front mountAn out-front for a Karoo 3 on 31.8 mm bars with the official 4-hole pattern and a 20 mm GoPro boss.

Jetboil Flash 2.0 pot-support ring, 3D printable part

Jetboil Flash 2.0 pot-support ringA ring that lets a Flash 2.0 hold a non-Jetboil 1 L pot, 110 mm ID with three 8 mm tabs.

Kuat NV 2.0 ratchet-handle hook, 3D printable part

Kuat NV 2.0 ratchet-handle hookA hook that parks an NV 2.0 ratchet handle so it does not swing into the tailgate, 16 mm snap.

MSR PocketRocket 2 110 g canister stand, 3D printable part

MSR PocketRocket 2 110 g canister standA three-leg stand that widens a 110 g canister under a PocketRocket 2 so it does not tip a 1 L pot.

Petzl Actik Core bike-helmet mount, 3D printable part

Petzl Actik Core bike-helmet mountA mount that puts an Actik Core on a bike-helmet vent, 20 mm snap and the official 25 mm lamp plate.

Rad Power RadRunner basket spacer, 3D printable part

Rad Power RadRunner basket spacerA 20 mm spacer pair that lifts a RadRunner rear basket so a fat 4 inch tyre does not rub.

Sea to Summit Spark footbox vent clip, 3D printable part

Sea to Summit Spark footbox vent clipA clip that holds a Spark bag's footbox vent open on a humid night, 20 mm snap.

Bike, car, pets, bathroom & travel

Light mounts, dash holders, feeder risers, razor stands, cable wraps and other everyday fixes.

AirTag hidden bike bottle-cage mount, 3D printable part

AirTag hidden bike bottle-cage mountA 40 × 36 × 12 mm plate that hides an AirTag under a bottle cage so a thief does not see a hanging tag.

AirTag hidden pocket for a MacBook sleeve, 3D printable part

AirTag hidden pocket for a MacBook sleeveA 40 × 36 × 10 mm TPU pocket that slips an AirTag into the seam of a 13 or 16-inch MacBook sleeve without a bulge.

AirTag hidden steerer-cap mount, 3D printable part

AirTag hidden steerer-cap mountA steerer cap that hides an AirTag under a 1-1/8 inch top cap with a 32 mm well and a 5 mm star-nut hole.

AirTag house-key silent snap fob, 3D printable part

AirTag house-key silent snap fobA silent fob that holds an AirTag and a house key on a 6 mm ring without the rattle of Apple's plastic case.

AirTag saddle-rail stealth cover, 3D printable part

AirTag saddle-rail stealth coverA cover that looks like a rail bumper and holds an AirTag between 7 mm rails with 1 mm TPU lips.

Apple Watch Ultra 3 Action-button bumper, 3D printable part

Apple Watch Ultra 3 Action-button bumperA TPU bumper that guards the Ultra 3 Action button and siren grille without covering the crown, 52 mm ring 2 mm thick.

Away Bigger Carry-On handle AirTag clip, 3D printable part

Away Bigger Carry-On handle AirTag clipA clip that hides an AirTag on an Away Bigger Carry-On trolley handle, 32 mm well and a 20 mm snap.

BabyBjörn bouncer toy-bar clip, 3D printable part

BabyBjörn bouncer toy-bar clipA clip that hangs a toy bar on a BabyBjörn bouncer frame, 18 mm snap and a 8 mm ring.

Bugaboo Butterfly phone mount, 3D printable part

Bugaboo Butterfly phone mountA phone mount that clamps a 70–85 mm phone onto a Butterfly handle, 18 mm snap and a 12 mm lip.

Cybertruck vault-bin divider, 3D printable part

Cybertruck vault-bin dividerA divider that splits a Cybertruck vault bin into two 150 mm wells for straps and a lock.

Galaxy S26 Ultra car vent cradle, 3D printable part

Galaxy S26 Ultra car vent cradleA vent-clip cradle for a Samsung Galaxy S26 Ultra (about 164 × 79 × 8.1 mm) with a 82 × 12 mm well that clears the camera island and a pair of 10–16 mm slat…

Hyundai Ioniq 6 charge-port holster, 3D printable part

Hyundai Ioniq 6 charge-port holsterA garage holster that parks a CCS / NACS handle next to an Ioniq 6 so the cable does not sit in a puddle.

See all 119 →

Do not see your part?

Describe it in your own words with your own measurements, generate it and download it. Start with Maker at $7.99 a month; Pro from $14.99 a month, cancel anytime.

Get startedSee pricing