1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Organizers & storage
25 mm French-cleat safety-glasses bin
This is not a fixed STL. SpeakCAD generates the 25 mm french-cleat safety-glasses bin to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a 25 mm french-cleat safety-glasses bin is
A 120 × 80 × 60 mm bin on a 25 mm French cleat that holds two pairs of safety glasses and a pack of earplugs. Print in PLA with 1.6 mm walls.
Glasses on a hook get scratched. In SpeakCAD you set the pair count, preview the bin in the browser without paying, then download the STL.
Example prompt
Model a 25 mm French-cleat glasses bin 120×80×60 mm, 1.6 mm walls, open front, 15 mm lip.
People also search
french cleat glasses bin stlcleat safety glasses holder 3d printworkshop glasses cleat binfrench cleat ppe holder 3d model
Questions people ask about a 25 mm french-cleat safety-glasses bin
A 120 × 80 × 60 mm bin on a 25 mm French cleat that holds two pairs of safety glasses and a pack of earplugs. Print in PLA with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a 25 mm French-cleat glasses bin 120×80×60 mm, 1.6 mm walls, open front, 15 mm lip.
Glasses on a hook get scratched. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Stackable drawer organizer tray with dividersA shallow open tray that drops into a desk or kitchen drawer and splits it into compartments for pens, batteries, clips and other loose items.Apple Pencil Pro desk tray with USB-C adapter pocketA desk tray that stores an Apple Pencil Pro or 2nd generation (166 mm long, 8.9 mm across) in a half-round groove, with a second groove for the shorter Apple…Tesla Model 3 center console organizer tray insertA tray that drops into the deep front cubby of the 2021 onward Tesla Model 3 and Model Y center console and splits it into a coin well, a key card slot, a su…Framework Laptop 16 GPU module storage trayA padded tray that stores a Framework 16 GPU module (about 150 × 80 × 20 mm) plus two expansion cards in labelled 32 × 14 mm slots.Sonicare DiamondClean travel-case insertAn insert that holds a DiamondClean handle and two heads in a 180 × 50 mm hard case with 0.4 mm clearance.IKEA BROR shelf end-stop pairA pair of end stops that keep bins from sliding off a BROR shelf (about 85 or 110 cm) when you roll the unit.