1
SpeakCAD has 100 ready-made IKEA SKÅDIS pegboard holders, each shaped around one real product: battery racks for DeWalt, Milwaukee, Makita, Ryobi, Bosch packs, holsters for drills and impact drivers, racks for Wera and Knipex tools, hangers for AirPods Max and Sony headphones, cradles for DualSense, Switch 2 and Steam Deck, Bambu Lab plate holders and paint racks. Every model hangs on the standard SKÅDIS hooks (5 × 15 mm slots, 40 mm apart, 5 mm board), costs 2 credits, and opens in the browser editor where every size is a number you can change before you download the STL, the 3MF or G-code sliced for your printer.
Power tool batteries, drills and blades 25Hand tools, measuring and soldering 25Phones, headphones, consoles and desk tech 253D printing, paints, crafts and home 25
Power tool batteries, drills and blades (25)
Battery racks that copy each pack's own slide rail or stem, drill and impact driver holsters, bit case shelves and blade racks for DeWalt, Milwaukee, Makita, Ryobi, Bosch, Metabo, Einhell, Parkside, Hilti, Festool and Dremel.Hand tools, measuring and soldering (25)
Screwdriver racks for Wiha, Wera and PB Swiss, Knipex plier racks, Leatherman and Victorinox holders, tape measures, knives, clamps, multimeters, micrometers and soldering iron stands.Phones, headphones, consoles and desk tech (25)
Hangers and shelves for AirPods, AirPods Max, Apple Pencil, MagSafe, iPad, Sony and Bose headphones, Logitech MX, Nintendo Switch 2, DualSense, Xbox controllers, Steam Deck, Meta Quest 3, GoPro, DJI and Raspberry Pi.3D printing, paints, crafts and home (25)
Bambu Lab and Prusa build plate holders, hotend and spool holders, Citadel, Vallejo and Tamiya paint racks, Posca, Copic and Sharpie marker racks, Dyson tools, Nespresso capsules and LEGO minifigures.More SKÅDIS parts in the library
IKEA SKADIS rack for Wera Kraftform screwdrivers →IKEA SKADIS holder for a 150 mm digital caliper →IKEA SKADIS metric hex key holder, 1.5 to 10 mm →IKEA SKADIS hook for 3M Peltor ear defenders →IKEA SKADIS tape roll holder for 76 mm cores →IKEA SKÅDIS holder for Makita impact bits →IKEA SKÅDIS holder for Festool Domino tenons →IKEA Skadis hook for Knipex Cobra and combination pliers →IKEA Skadis holder for Wera Joker wrench set →IKEA SKÅDIS 65 mm spray-can holder →IKEA SKÅDIS phone charging shelf →IKEA SKÅDIS 6 mm cable-hook pair →
How it works
From the list to a holder on the board
Measure the thing it holds before you print: a 5.0 Ah battery is taller than a 2.0 Ah one, a phone in a case is thicker than without. That number is the difference between a holder that clicks in and one that rattles.2
Get it and check the fit
Get it for 2 credits: it opens in your account's editor. Tap a face to read its size and compare it with your tool. The pocket width, the slot, the clearance and the back plate are named parameters: type your number, the model updates in a second.3
Download STL, 3MF or G-code
Download the STL or 3MF for your slicer, or G-code sliced with the official profile of one of 380+ printers (Bambu Lab, Prusa, Creality, Elegoo, Anycubic…).4
Print it standing, hang it
Each model prints standing as it hangs, so the layers run the strong way through the hooks. The two hook tips may want a small tree support. PETG for batteries, drills and anything heavy; PLA is fine for desk items.IKEA SKÅDIS in numbers
| What | Size |
|---|---|
| Slot (hole) size | 5 × 15 mm (measured boards: about 5.2 × 15.2 mm) |
| Board thickness | 5 mm fibreboard, ±0.2 mm |
| Slot spacing in a row | 40 mm, centre to centre |
| Rows | Staggered: each row 20 mm lower and 20 mm to the side |
| Hook in the models | 4.6 mm stem through the slot (0.2 mm play each side), 3.5 mm leg hanging 7 mm behind the board |
| Price of a model | 2 credits, STL and 3MF download included |
| Your own holder, described to the AI | 4 credits on a plan, 3 without one |
Not in the list? Describe your own
Each prompt opens the editor with the description typed. Change the numbers to your tool's first.“An IKEA SKADIS holder for my cordless glue gun: a cradle 32 mm wide and 60 mm deep with a 12 mm slot for the nozzle at the front, a 4 mm back plate 80 × 70 mm, two SKADIS hooks 40 mm apart at the top for the 5 × 15 mm slots of the 5 mm board and an anti-swing pin 20 mm lower, 2.4 mm PETG walls”
Open this prompt in the editor“An IKEA SKADIS shelf 120 mm wide and 60 mm deep with a 6 mm front lip and a 10 mm cable slot at the back, a 4 mm back plate 120 × 60 mm with three SKADIS hooks 40 mm apart for the 5 × 15 mm slots, two gussets under the shelf, PETG”
Open this prompt in the editor“An IKEA SKADIS rack for six round files with 6 mm tangs: six 7 mm holes on a 20 mm pitch in a shelf 130 mm wide and 25 mm deep, a 4 mm back plate with two SKADIS hooks 40 mm apart for 5 × 15 mm slots”
Open this prompt in the editor“An IKEA SKADIS cup 70 mm across and 90 mm tall for pencils and markers, 2 mm walls, a 3 mm floor with a 10 mm drain hole, on a 4 mm back plate 80 × 100 mm with two SKADIS hooks 40 mm apart and a pin 20 mm lower”
Open this prompt in the editorHow to choose a SKÅDIS holder that holds
- Measure the product, not the photo. Battery packs change height with capacity (a DeWalt 5.0 Ah is taller than a 2.0 Ah), plier handles change with the coating, phones and controllers change with a case. Every holder lists the size it was made for.
- Count the hooks. Light items (a pen rack, an AirPods case) hang on two hooks. Batteries, drills, multimeters and spool arms use two hooks at the top and pins in the staggered row below, so the part cannot swing out when you pull a tool.
- PETG for weight, PLA for desks. PLA creeps under a constant load and softens in a hot garage; PETG does not. Use 4 walls on battery racks and drill holsters.
- Print standing. The models are drawn in the pose they hang, bottom on the bed: the layers run across the hooks, which is the strong direction.
Ready-made, resized or your own
Take the ready-made holder when your product is in the list: it is a real model with a picture and a size, not a prompt. If your version is different (an older battery, a thicker case, two tools instead of one), open it and change the pocket number before you download. If nothing in the list is close, describe your holder to the AI with the measurement that decides the fit, or start from the holder generator. Already have a SKÅDIS STL that almost fits? Upload it and change it: a wider slot, a deeper pocket, a hole for a cable.
Why not just scale a download?
Scaling a pegboard part in the slicer scales its hooks with it: at 110 % the 4.6 mm stem becomes 5.1 mm and no longer goes into a 5 mm slot. The SpeakCAD models keep the hook numbers fixed and change only the part that holds your product.
What it costs
Each SKÅDIS model is 2 credits, and the STL and 3MF downloads of your copy are included. Shaping a part by hand in the editor is free; a new holder described to the AI is 4 credits on a plan, 3 without one. Maker gives 50 credits a month for $7.99, cancel anytime.
Questions
The slots are 5 mm wide and 15 mm tall, 40 mm apart centre to centre in a row, and each row is staggered 20 mm down and 20 mm sideways from the one above. The fibreboard is 5 mm thick. Measured boards run about 5.2 × 15.2 mm, so a printed hook stem of 4.6 mm slides in without force.
On speakcad.com/ikea-skadis: 100 holders made for named products, including DeWalt, Milwaukee, Makita, Ryobi, Bosch, Metabo, Einhell, Parkside, Hilti, Festool, Dremel, Wera, Wiha, Knipex, Leatherman, Victorinox, Stanley, Fluke, Hakko, iFixit, Apple, Sony, Bose, Logitech, Nintendo, PlayStation, Xbox, Steam Deck, Meta Quest, GoPro, DJI, Bambu Lab, Prusa, Citadel, Posca, Copic, Dyson and Nespresso. Each one is 2 credits, opens in the browser so you can change its sizes, and downloads as STL, 3MF or G-code for your printer.
Yes: racks for DeWalt 20V MAX, Milwaukee M18 and M12, Makita 18V LXT, Ryobi ONE+, Bosch Professional 18V, Metabo CAS, Einhell Power X-Change, Parkside X20V, Worx PowerShare, Black+Decker, Hilti Nuron and Festool 18V packs. The slide-on racks copy the pack's own rail, so the battery slides in as it does on the tool. Measure your rail first: the rail width is a parameter you can change in the editor.
Yes, printed in PETG with 4 walls and with the hooks at the top and pins in the row below, which is how the drill holsters are drawn. The weight pulls the hooks against the solid board and the pins stop the holster from tipping out. PLA works for a few hundred grams but creeps over months under a heavy tool.
PETG for batteries, drills, multimeters, spool holders and anything in a garage that gets hot. PLA for pens, AirPods, controllers and other light desk items.
Yes. Every model is a SpeakCAD program with named sizes (pocket width, depth, slot, clearance, back plate). Open it, tap a face to read its size, type your number and the part updates in about a second, then download it. The hook sizes stay fixed so it still fits the board.
No. They are 3D printable models made by SpeakCAD to fit the IKEA SKÅDIS pegboard and the products they name; SpeakCAD is not affiliated with IKEA or with the tool and electronics brands.
Read more
The whole marketplaceEvery community model, most of them free, all editable before you print.Holder generatorA holder shaped to one object you measure: a tool, a can, a controller.Organizers libraryDrawer inserts, Gridfinity bins and pegboard parts with their prompts.Change a SKÅDIS STL you foundA wider slot, a deeper pocket, a cable hole, on a model you downloaded.Slice it for your printerG-code with the official profile of one of 380+ printers, in the browser.