1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Organizers & storage
IKEA SKÅDIS holder for Makita impact bits
This is not a fixed STL. SpeakCAD generates the ikea skådis holder for makita impact bits to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a ikea skådis holder for makita impact bits is
A SKÅDIS pegboard plate with 15 hex pockets 6.6 mm across and two 5 mm SKÅDIS hooks on 40 mm centres. The plate is 120 × 80 × 16 mm. Print in PLA.
Bits in a jar on the pegboard spill. Describe the bit count in SpeakCAD, preview the plate in the browser without paying, then download the STL.
Example prompt
Model a SKÅDIS bit plate 120×80×16 mm with 15 hex pockets 6.6×12 mm and two 5 mm hooks on 40 mm centres, 1.6 mm walls.
People also search
skadis makita bit holder stlikea skadis impact bit rack 3d printskadis hex bit plateikea skadis driver bit holder 3d model
Questions people ask about a ikea skådis holder for makita impact bits
A SKÅDIS pegboard plate with 15 hex pockets 6.6 mm across and two 5 mm SKÅDIS hooks on 40 mm centres. The plate is 120 × 80 × 16 mm. Print in PLA.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a SKÅDIS bit plate 120×80×16 mm with 15 hex pockets 6.6×12 mm and two 5 mm hooks on 40 mm centres, 1.6 mm walls.
Bits in a jar on the pegboard spill. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Ninja Creami pint lid and cup holder rackA rack that stores the spare pint containers and lids for a Ninja Creami NC300 or NC500 so they are not stacked loose in the freezer door.Gridfinity 2×1 bin for Leatherman Wave PlusA 2×1 Gridfinity bin (84 × 42 mm, 6U) with a 105 × 18 × 18 mm well that a Wave Plus drops into closed, plus a 12 mm slot for a bit kit.Mac Studio M4 top SD-card caddyA caddy that sits on a Mac Studio M4 and holds six SD cards plus two CFexpress in labelled slots, 120 × 80 × 16 mm, rubber-foot recesses so it does not slide.IKEA BROR pegboard hook adapterAn adapter that lets a 6 mm pegboard hook sit in the BROR side-panel holes (about 10 mm) so you can hang tools on the trolley.Jewelry tray with ring bars and earring holesA dresser tray combining a ring bar section, a grid of 1.5 mm holes for stud earrings, and a shallow well for bracelets and necklaces.ESP32 dev board storage rack with 10 slotsA desk rack that stores ESP32 DevKit, ESP32-C3, ESP8266 NodeMCU and Arduino Nano boards upright with their USB ports facing up so the right one is easy to grab.