1
Organizers & storage
Stanley and Yeti tumbler lid organizer for the cabinet
A rack that stands tumbler lids on edge in a kitchen cabinet so the Stanley Quencher, Yeti Rambler and Hydro Flask lids stop sliding around and losing their straws. Lids for 30 and 40 ounce tumblers are around 95 mm in diameter and 20 to 30 mm tall, so the rack has eight slots 32 mm wide with a 100 mm back rail, a 15 degree lean and a 6 mm front lip that stops lids rolling out. A 6 mm channel along the front holds straws. The base is 270 by 110 mm with 1.6 mm walls, and it prints upright without supports. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| overall length (X) | 270 mm |
| overall depth (Y) | 110 mm |
| overall height (Z) | 60 mm |
| base plate thickness | 3 mm |
| divider/wall thickness | 1.6 mm |
| y position of rail bottom-front edge (before lean projection) | 90 mm |
| width of straw notch | 6 mm |
| how far down from rail top the notch is cut | 22 mm |
Example prompt
Create a lid organizer 270 mm long, 110 mm deep and 60 mm tall with a 3 mm base, eight slots 32 mm wide leaning back 15 degrees against a 100 mm back rail, a 6 mm front lip, a 6 mm straw channel and 1.6 mm walls, for Stanley and Yeti tumbler lids 95 mm in diameter.
Fit notes
Lid diameters vary between 20, 30 and 40 ounce tumblers and between brands, so a rack sized to the lids you actually own holds them upright rather than at random angles. In SpeakCAD you describe your lids and shelf width, preview the organizer in the browser, add a straw holder in the chat and download the STL.
Questions people ask about a Stanley and Yeti tumbler lid organizer for the cabinet
A rack that stands tumbler lids on edge in a kitchen cabinet so the Stanley Quencher, Yeti Rambler and Hydro Flask lids stop sliding around and losing their straws. Lids for 30 and 40 ounce tumblers are around 95 mm in diameter and 20 to 30 mm tall, so the rack has eight slots 32 mm wide with a 100 mm back rail, a 15 degree lean and a 6 mm front lip that stops lids rolling out. A 6 mm channel along the front holds straws. The base is 270 by 110 mm with 1.6 mm walls, and it prints upright without supports.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More organizers & storage
ESP32 dev board storage rack with 10 slotsReady-made, opens free. A desk rack that stores ESP32 DevKit, ESP32-C3, ESP8266 NodeMCU and Arduino Nano boards upright with their USB ports facing up so the right one is easy to grab.Tesla Model 3 center console organizer tray insertReady-made, opens free. A tray that drops into the deep front cubby of the 2021 onward Tesla Model 3 and Model Y center console and splits it into a coin well, a key card slot, a su…DJI Mini 4 Pro ND filter case with six slotsReady-made, opens free. A pocket case for the snap-on ND filters used by the DJI Mini 4 Pro and Mini 3 Pro, which measure roughly 25 x 24 mm and 8 mm deep including the clip and are…RIDGID Pro Gear stack bit caddyReady-made, opens free. A caddy that drops into a RIDGID Pro Gear stack drawer and holds 40 hex bits in 6.6 mm pockets plus two 12 mm driver shafts.Framework 16 input-module trayReady-made, opens free. A tray that stores two Framework 16 input modules (numpad, RGB macropad) in 130 × 70 mm wells.Tiered thread spool rack for sewing tableReady-made, opens free. A stepped rack that holds sewing thread spools on angled pegs so the labels stay visible and the thread ends do not unravel into each other.