Tesla Model 3 center console organizer tray insert
A tray that drops into the deep front cubby of the 2021 onward Tesla Model 3 and Model Y center console and splits it into a coin well, a key card slot, a sunglasses bay and a 60 by 90 mm phone-free space for a wallet. The cubby is roughly 190 by 115 mm at the opening and narrows toward the floor, so the tray tapers 2 degrees and rests on a 4 mm ledge rather than the bottom. Walls are 1.5 mm with rounded 3 mm corners so it slides in silently, and a 1 mm felt-friendly recess in the floor accepts self-adhesive flocking. Print flat in matte PETG or ASA so it does not warp in a hot cabin.
Refresh and Highland consoles differ by several millimetres, which is why downloaded trays wobble. In SpeakCAD you give your measured opening, preview the tray in the browser without paying, move a divider in the chat, and download the STL.
Model a console tray 188 mm long, 113 mm wide and 40 mm tall tapering inward 2 degrees, with 1.5 mm walls, 3 mm corner radii, a 4 mm rim ledge, a 90 by 60 mm coin well, a 3 by 60 mm key card slot and a 165 by 45 mm sunglasses bay.