1
Organizers & storage
SIM eject tool and nano SIM card holder keychain
A keychain tag that stores a SIM eject pin and up to two spare nano SIM cards (12.3 x 8.8 x 0.67 mm) for travel, so swapping an eSIM-less iPhone 15 or Galaxy S24 to a local carrier does not mean hunting for a paper clip. The eject pin sits in a 1 mm bore with a friction lip, the SIM pockets are 12.6 x 9.1 x 0.9 mm behind a sliding cover, and a 5 mm ring hole takes a split ring. The tag is 40 x 22 x 5 mm, prints flat and needs no supports. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| mm, overall length | 40 mm |
| mm, overall width | 22 mm |
| mm, overall thickness | 5 mm |
| mm, min wall thickness | 1.2 mm |
| mm main channel diameter | 1 mm |
| mm friction lip (entrance) diameter | 0.8 mm |
| mm length of the narrow lip section | 1.5 mm |
| mm total bore depth (from open end) | 22 mm |
| mm, y position of channel (below pockets) | 3 mm |
| x start of pocket region | 10 mm |
| groove width/height | 0.8 mm |
| total clearance for sliding fit (body groove vs cover ridge) | 0.3 mm |
Example prompt
Design a 40 x 22 x 5 mm keychain tag with a 1 mm diameter, 22 mm deep bore for a SIM eject pin with a friction lip, two 12.6 x 9.1 x 0.9 mm nano SIM pockets under a sliding cover on 0.8 mm rails, a 5 mm split ring hole and 1.2 mm walls.
Fit notes
Nano SIM pockets have to be tight or the cards fall out in your pocket. In SpeakCAD you say how many cards and which pin you carry, preview the tag in the browser, add a slot for an adapter or a microSD in the chat, then download the STL.
Questions people ask about a SIM eject tool and nano SIM card holder keychain
A keychain tag that stores a SIM eject pin and up to two spare nano SIM cards (12.3 x 8.8 x 0.67 mm) for travel, so swapping an eSIM-less iPhone 15 or Galaxy S24 to a local carrier does not mean hunting for a paper clip. The eject pin sits in a 1 mm bore with a friction lip, the SIM pockets are 12.6 x 9.1 x 0.9 mm behind a sliding cover, and a 5 mm ring hole takes a split ring. The tag is 40 x 22 x 5 mm, prints flat and needs no supports.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More organizers & storage
Bosch L-BOXX 238 jigsaw-blade insertReady-made, opens free. An insert for an L-BOXX 238 that holds a GST 18V, 20 T-shank blades in 1.5 mm slots, and a splinter guard pack.Mac Studio M4 top SD-card caddyReady-made, opens free. A caddy that sits on a Mac Studio M4 and holds six SD cards plus two CFexpress in labelled slots, 120 × 80 × 16 mm, rubber-foot recesses so it does not slide.Makeup brush holder with divided cupsReady-made, opens free. A tall cup split into three sections of different heights so face brushes, eye brushes and eyeliner pencils each stand at a useful height without disappearing.Raspberry Pi HAT storage rack with labelled slotsReady-made, opens free. A vertical rack that stores Raspberry Pi HATs, pHATs and GPIO expansion boards on their edge so pins are not bent in a drawer.Prusa MK4 nozzle storage box for Nextruder and V6 nozzlesReady-made, opens free. A hinged box that keeps Prusa Nextruder nozzles, the V6 adapter nozzles and a couple of Obxidian and high-flow nozzles sorted by size instead of loose in a bag.Canon LP-E6 battery holder with SD card slotsReady-made, opens free. A camera-bag organizer that carries three Canon LP-E6, LP-E6N or LP-E6NH batteries, the 38.4 x 21 x 56.8 mm pack shared by the EOS R6, R6 Mark II, R5 and 5D…