1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Organizers & storage
Gridfinity 1×1 bin for SD, microSD and CFexpress
This is not a fixed STL. SpeakCAD generates the gridfinity 1×1 bin for sd, microsd and cfexpress to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a gridfinity 1×1 bin for sd, microsd and cfexpress is
A 1×1 Gridfinity bin (42 × 42 mm, 3U) with a 33 × 24 × 3 mm SD slot, two 16 × 12 × 1.2 mm microSD slots and a 30 × 21 × 4 mm CFexpress Type B well. Labels are 0.5 mm deep. Print flat in PLA.
A camera-bag dump is how cards vanish. List the cards you carry in SpeakCAD, preview the bin in the browser for free, then download the STL.
Example prompt
Create a Gridfinity 1×1 3U bin 42×42×21 mm with one 33×24×3 mm SD slot, two 16×12×1.2 mm microSD slots, one 30×21×4 mm CFexpress well and 0.5 mm labels.
People also search
gridfinity sd card bin stlgridfinity cfexpress holder 3d printgridfinity camera card organizer1x1 sd microsd bin 3d model
Questions people ask about a gridfinity 1×1 bin for sd, microsd and cfexpress
A 1×1 Gridfinity bin (42 × 42 mm, 3U) with a 33 × 24 × 3 mm SD slot, two 16 × 12 × 1.2 mm microSD slots and a 30 × 21 × 4 mm CFexpress Type B well. Labels are 0.5 mm deep. Print flat in PLA.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a Gridfinity 1×1 3U bin 42×42×21 mm with one 33×24×3 mm SD slot, two 16×12×1.2 mm microSD slots, one 30×21×4 mm CFexpress well and 0.5 mm labels.
A camera-bag dump is how cards vanish. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Smartwatch charger cable organizer for Garmin Fitbit and WhoopA tray with three bays that keeps a Garmin four-pin clip, a Fitbit Charge 6 charging clip and a Whoop 4.0 battery pack each in its own pocket with the cable…IKEA Kallax insert divider for 33 cm cubesA cross-shaped divider that slots into a single Kallax cube and splits the 33 by 33 cm opening into four compartments for scarves, yarn, cables or toys.Bambu Lab H2D build-plate wall rackA wall rack that stores three H2D / 350 mm class build plates on 8 mm lips with 6 mm gaps so the textured side does not scratch.LEGO Technic gear-tray insertA tray insert that sorts Technic gears by tooth count in labelled wells (8, 12, 16, 20, 24, 40).IKEA SMÅSTAD wardrobe rail hookA hook that hangs backpacks from a SMÅSTAD clothes rail (about 16 mm) so they are not on the floor of the wardrobe.Small parts sorting bins with label slotOpen-fronted bins for screws, nuts, LEDs, beads or any tiny hardware that otherwise ends up loose in a jar.