1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Organizers & storage
Dyson Supersonic nozzle magnetic caddy
This is not a fixed STL. SpeakCAD generates the dyson supersonic nozzle magnetic caddy to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a dyson supersonic nozzle magnetic caddy is
A caddy that holds the four Supersonic magnetic nozzles (styling, diffuser, wide-tooth, flyaway) so they stay in one place next to the charger. The plate is 180 × 70 × 20 mm with four 46 mm wells 12 mm deep and a 1 mm lip. Print flat in PLA with 1.6 mm walls.
Nozzles in a cup scratch the magnets. In SpeakCAD you drop the attachments you skip, preview the caddy in the browser without paying, then download the STL.
Example prompt
Model a Supersonic nozzle caddy 180×70×20 mm, four 46 mm wells 12 mm deep, 1 mm lip, 1.6 mm walls.
People also search
dyson supersonic nozzle holder stlsupersonic attachment caddy 3d printdyson dryer nozzle organizersupersonic magnet nozzle tray 3d model
Questions people ask about a dyson supersonic nozzle magnetic caddy
A caddy that holds the four Supersonic magnetic nozzles (styling, diffuser, wide-tooth, flyaway) so they stay in one place next to the charger. The plate is 180 × 70 × 20 mm with four 46 mm wells 12 mm deep and a 1 mm lip. Print flat in PLA with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a Supersonic nozzle caddy 180×70×20 mm, four 46 mm wells 12 mm deep, 1 mm lip, 1.6 mm walls.
Nozzles in a cup scratch the magnets. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
RIDGID Pro Gear stack bit caddyA caddy that drops into a RIDGID Pro Gear stack drawer and holds 40 hex bits in 6.6 mm pockets plus two 12 mm driver shafts.Dyson Big+Quiet Formaldehyde remote cradleA cradle that holds the larger Big+Quiet Formaldehyde remote (about 130 × 50 × 14 mm) on the top of the cylinder so it does not slide off the curved lid.DeWalt TSTAK deep-box divider setDividers that split a TSTAK deep box into four 150 × 140 mm wells for fittings.Glasses stand for several pairs of spectaclesA tiered stand that holds reading glasses, sunglasses and spare frames open-armed, lenses facing out and never touching a surface.Festool Systainer insert for Domino cutters and drill bitsA foam-free insert that sits in the bottom of a Festool Systainer SYS3 M 137 and keeps Domino DF 500 cutters, spare bits and the wrench in fixed pockets.Dr. Brown's bottle vent and insert organizer trayA tray that gives the many small parts of Dr.