Ninja Creami pint lid and cup holder rack
A rack that stores the spare pint containers and lids for a Ninja Creami NC300 or NC500 so they are not stacked loose in the freezer door. Creami pints are about 95 mm in diameter and 110 mm tall, so the rack has four 97 mm rings on a 3 mm base that hold pints upright, and a side rail with four 6 mm slots that store the lids on edge. The footprint is 410 by 110 mm to sit on a freezer shelf, and 1.6 mm walls keep it light. Print flat with the rings up; PETG copes with freezer cold without becoming brittle.
Deluxe pints for the NC500 are taller and the number of pints you own varies, so a rack generated from your own count and model fits better than a generic one. In SpeakCAD you say which Creami you own and how many pints, preview the rack in the browser at no cost, ask for a two-row version in the chat and download the STL.
Model a rack 410 mm long, 110 mm wide and 30 mm tall with a 3 mm base and four 97 mm diameter rings 20 mm tall for Ninja Creami pint containers, plus a rear rail 40 mm tall with four 6 mm wide slots 30 mm deep for storing lids on edge, 1.6 mm walls throughout.