1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Organizers & storage
Bambu Lab H2D build-plate wall rack
This is not a fixed STL. SpeakCAD generates the bambu lab h2d build-plate wall rack to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a bambu lab h2d build-plate wall rack is
A wall rack that stores three H2D / 350 mm class build plates on 8 mm lips with 6 mm gaps so the textured side does not scratch. The rack is 360 × 40 × 80 mm with two 4.5 mm holes on 200 mm centres. Print in two 180 mm halves in PETG so it fits a 220 mm bed.
A plate leaning in a corner dings the coating. In SpeakCAD you set the plate count, preview the rack in the browser for free, then download the STL.
Example prompt
Create an H2D plate rack 360×40×80 mm in two halves, three 8 mm lips with 6 mm gaps, two 4.5 mm holes on 200 mm centres, 2 mm PETG walls.
People also search
bambu h2d plate rack stlh2d build plate holder 3d printbambu 350mm plate wall rackh2d sheet storage 3d model
Questions people ask about a bambu lab h2d build-plate wall rack
A wall rack that stores three H2D / 350 mm class build plates on 8 mm lips with 6 mm gaps so the textured side does not scratch. The rack is 360 × 40 × 80 mm with two 4.5 mm holes on 200 mm centres. Print in two 180 mm halves in PETG so it fits a 220 mm bed.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create an H2D plate rack 360×40×80 mm in two halves, three 8 mm lips with 6 mm gaps, two 4.5 mm holes on 200 mm centres, 2 mm PETG walls.
A plate leaning in a corner dings the coating. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Boss pedal patch cable and 9V power lead organizerA gig-bag tray that keeps the small stuff behind a pedalboard sorted: 15 cm patch cables, 5.5 x 2.1 mm 9 V daisy-chain leads for Boss and Strymon pedals, spa…Grease-gun coupler wall holderA wall hook that parks a grease-gun coupler and a spare Zerk cap, 20 mm saddle and a 8 mm cap well.IKEA TROFAST bin-lid clip pairA pair of clips that keep a TROFAST bin lid (about 42 × 30 cm) from sliding off in a car or under a bed.Framework 13 HDMI-module trayA tray that stores four Framework 13 expansion cards (HDMI, USB-C, USB-A, Ethernet) in 32 × 16 mm wells so they are not in a bag.Apple Watch band organizer drawer insert with lug railsA drawer insert with a row of rails that copy the Apple Watch case slot, so Sport, Solo Loop and Braided bands for 42, 44, 45, 46 and 49 mm watches slide on…Bambu Lab AMS desiccant holder tray for silica beadsA vented tray that clips into the unused floor space at the front of the Bambu Lab AMS, between the spool rollers, and holds about 60 g of loose silica gel b…