1
Organizers & storage
Voron 2.4 hex key tool holder for 2020 frame
This is not a fixed STL. SpeakCAD generates the voron 2.4 hex key tool holder for 2020 frame to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a tool holder for a 2020 extrusion, 100×30×25 mm, hex holes for 1.5, 2, 2.5 and 3 mm keys, 45×15 mm cutters pocket, M5 T-nut hole.
What a voron 2.4 hex key tool holder for 2020 frame is
A tool holder that bolts to the 2020 frame of a Voron 2.4 and keeps the 1.5, 2, 2.5 and 3 mm hex keys used on Voron builds, plus flush cutters and tweezers. It is 100 × 30 × 25 mm with four hex holes, a 45 × 15 mm cutters pocket, a 6 mm tweezers slot and an M5 T-nut hole. Print in PETG or ASA, flat.
On a Trident the frame is the same 2020 so it fits too, but not on a 2040 beam. Open the model in SpeakCAD for free, change the holes for your tools in the viewer or the chat, then download the STL.
People also search
voron tool holder stlvoron hex key holder2020 tool holdervoron 2.4 tool holder 3d print
Questions people ask about a voron 2.4 hex key tool holder for 2020 frame
A tool holder that bolts to the 2020 frame of a Voron 2.4 and keeps the 1.5, 2, 2.5 and 3 mm hex keys used on Voron builds, plus flush cutters and tweezers. It is 100 × 30 × 25 mm with four hex holes, a 45 × 15 mm cutters pocket, a 6 mm tweezers slot and an M5 T-nut hole. Print in PETG or ASA, flat.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a tool holder for a 2020 extrusion, 100×30×25 mm, hex holes for 1.5, 2, 2.5 and 3 mm keys, 45×15 mm cutters pocket, M5 T-nut hole.
On a Trident the frame is the same 2020 so it fits too, but not on a 2040 beam. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Makita MAKPAC Type 2 impact-driver insertA Type 2 MAKPAC insert that holds an 18V LXT impact driver, a battery, and a 10-bit rail.IKEA TROFAST bin-lid clip pairA pair of clips that keep a TROFAST bin lid (about 42 × 30 cm) from sliding off in a car or under a bed.Elegoo Neptune 4 Pro scraper holderA scraper holder that bolts to the side of a Neptune 4 Pro upright with M5 T-nuts, so the spatula and the pliers stay by the printer.French cleat hanger for a 184 mm circular sawA French cleat hanger for a 7-1/4 inch (184 mm) circular saw that hangs it by the base shoe, blade guard facing the wall.AA and AAA battery storage box with lidA two-level case that stores fresh cells in rows and keeps the used ones separate.Gridfinity holder for Knipex Pliers Wrench and CobraA 2 by 2 Gridfinity block, 84 by 84 mm, with four angled slots that hold a Knipex Pliers Wrench 180 and 250 and Cobra 180 and 250 jaws-down so the handles le…