Whiskas and Felix cat food pouch dispenser box
A gravity dispenser that stacks wet food pouches flat and feeds one from the bottom, so a 40-pouch box of Whiskas, Felix or Sheba lives on the shelf instead of loose in a cupboard. Standard 85 to 100 g pouches measure about 130 by 175 mm and 15 mm thick, so the box interior is 135 by 180 mm with a 35 mm pull-out gap at the bottom and a 40 degree ramp that slides the next pouch forward. A 240 mm height holds 14 pouches, and a slot on the front shows how many remain. Walls are 1.6 mm; it prints upright with no supports.
Pouch sizes differ between brands and between kitten and adult ranges, so a dispenser generated to your pouches slides properly rather than jamming. In SpeakCAD you name the brand and count, preview the box in the browser at no cost, add a second column for dry treats in the chat and download the STL or 3MF.
Create a pouch dispenser box with an interior 135 mm wide, 180 mm deep and 240 mm tall with 1.6 mm walls, a 40 degree bottom ramp, a 35 mm tall front pull-out opening, a 15 mm wide viewing slot up the front face and a 3 mm base, for Whiskas pouches 130 x 175 x 15 mm.