1
Organizers & storage
Gridfinity bin for Wera Kraftform screwdriver set
A 3 by 1 Gridfinity bin, 125.5 by 41.5 mm on the standard 42 mm grid, that holds six Wera Kraftform Plus screwdrivers upright by the blade so the handles fan out where you can read the tips. Bores are 9 mm for the smaller blades and 12 mm for the 5.5 and 6.5 mm slotted drivers, each 30 mm deep so the handle shoulder rests on the top face. The bin uses the standard Gridfinity base profile with 6 by 2 mm magnet pockets, 6 units tall at 42 mm, and prints in PLA with a 1.2 mm wall and no supports. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| grid unit | 42 mm |
| number of grid units X | 3 |
| number of grid units Y | 1 |
| outer clearance vs grid (per Gridfinity spec, bin is grid - 0.5) | 0.5 mm |
| total height | 42 mm |
| wall thickness | 1.2 mm |
| floor thickness | 3 mm |
| total base height (stacking foot) | 4 mm |
| bottom chamfer height | 0.8 mm |
| vertical straight | 1.8 mm |
| top chamfer height (approx, sums to base_h roughly) | 2.15 mm |
| distance of pocket center from each corner edge | 8 mm |
Example prompt
Design a Gridfinity 3x1 bin 125.5 by 41.5 mm, 6 units tall, with 6 by 2 mm magnet pockets and six vertical bores across the top, four at 9 mm and two at 12 mm diameter, 30 mm deep, 1.2 mm walls.
Fit notes
Set contents vary between the 6-piece, 7-piece and Micro kits, which is why a downloaded bin leaves empty holes. Tell SpeakCAD the blades you own, preview the bin in the browser, swap a bore for a Kraftform Micro slot in the chat, and download the STL.
Questions people ask about a Gridfinity bin for Wera Kraftform screwdriver set
A 3 by 1 Gridfinity bin, 125.5 by 41.5 mm on the standard 42 mm grid, that holds six Wera Kraftform Plus screwdrivers upright by the blade so the handles fan out where you can read the tips. Bores are 9 mm for the smaller blades and 12 mm for the 5.5 and 6.5 mm slotted drivers, each 30 mm deep so the handle shoulder rests on the top face. The bin uses the standard Gridfinity base profile with 6 by 2 mm magnet pockets, 6 units tall at 42 mm, and prints in PLA with a 1.2 mm wall and no supports.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More organizers & storage
IKEA SKÅDIS holder for Makita impact bitsReady-made, opens free. A SKÅDIS pegboard plate with 15 hex pockets 6.6 mm across and two 5 mm SKÅDIS hooks on 40 mm centres.Apple TV Siri Remote 3rd-gen trayReady-made, opens free. A tray that parks a 3rd-gen Siri Remote (about 136 × 35 × 9 mm) plus a spare USB-C cable so the remote does not vanish between sofa cushions.Entryway catch-all tray for keys and walletReady-made, opens free. A low rectangular dish for the hallway table that corrals keys, wallet, earbuds and coins as you walk in.Raspberry Pi HAT storage rack with labelled slotsReady-made, opens free. A vertical rack that stores Raspberry Pi HATs, pHATs and GPIO expansion boards on their edge so pins are not bent in a drawer.Tesla Model 3 center console organizer tray insertReady-made, opens free. A tray that drops into the deep front cubby of the 2021 onward Tesla Model 3 and Model Y center console and splits it into a coin well, a key card slot, a su…Fujifilm X100VI 49 mm filter and lens cap holderReady-made, opens free. A desk or bag organizer for the small kit that the Fujifilm X100VI and X100V accumulate: the AR-X100 adapter ring, two or three 49 mm filters and the slip-on…