1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Organizers & storage
Apple TV Siri Remote 3rd-gen tray
This is not a fixed STL. SpeakCAD generates the apple tv siri remote 3rd-gen tray to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a apple tv siri remote 3rd-gen tray is
A tray that parks a 3rd-gen Siri Remote (about 136 × 35 × 9 mm) plus a spare USB-C cable so the remote does not vanish between sofa cushions. The well is 138 × 37 mm with 0.4 mm clearance, a 12 mm USB-C slot sits at the end, and the plate is 160 × 50 × 14 mm. Print flat in PLA with 1.6 mm walls.
A generic remote cup is too wide and the Siri Remote stands on its nose. In SpeakCAD you add a second remote, preview the tray in the browser without paying, then download the STL.
Example prompt
Model a Siri Remote 3rd-gen tray 160×50×14 mm, 138×37 mm well, 12 mm USB-C slot, 1.6 mm walls.
People also search
siri remote tray stlapple tv remote holder 3d printsiri remote 3rd gen standapple tv remote tray 3d model
Questions people ask about a apple tv siri remote 3rd-gen tray
A tray that parks a 3rd-gen Siri Remote (about 136 × 35 × 9 mm) plus a spare USB-C cable so the remote does not vanish between sofa cushions. The well is 138 × 37 mm with 0.4 mm clearance, a 12 mm USB-C slot sits at the end, and the plate is 160 × 50 × 14 mm. Print flat in PLA with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a Siri Remote 3rd-gen tray 160×50×14 mm, 138×37 mm well, 12 mm USB-C slot, 1.6 mm walls.
A generic remote cup is too wide and the Siri Remote stands on its nose. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Sony NP-FZ100 battery case for four batteriesA pocketable case that holds four Sony NP-FZ100 batteries, the 38.7 x 22.7 x 51.7 mm pack used by the A7 IV, A7 III, A6700 and A1, in labelled bays with a fl…IKEA SKÅDIS holder for Makita impact bitsA SKÅDIS pegboard plate with 15 hex pockets 6.6 mm across and two 5 mm SKÅDIS hooks on 40 mm centres.Dyson HP07 remote bedside cradleA bedside cradle for the HP07 remote so night-time oscillation changes do not mean a trip to the tower.Bosch Click & Go rail hookA hook that snaps onto a Bosch Click & Go rail and holds a tape or knife.Watch strap storage rack with numbered slotsA rack that stores spare smartwatch or quick-release straps flat and separated so silicone and leather bands do not stick together or curl.Gridfinity bin for Wera Kraftform screwdriver setA 3 by 1 Gridfinity bin, 126 by 42 mm on the standard 42 mm grid, that holds six Wera Kraftform Plus screwdrivers upright by the blade so the handles fan out…