1
Organizers & storage
French cleat rack for 310 ml caulk cartridges
This is not a fixed STL. SpeakCAD generates the french cleat rack for 310 ml caulk cartridges to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a French cleat caulk tube rack, six 54 mm cups with 14 mm nozzle holes, 340 mm long, 45 degree cleat for 19 mm plywood, PETG.
What a french cleat rack for 310 ml caulk cartridges is
A rack for six standard 310 ml caulk and sealant cartridges, about 50 mm across and 215 mm long with the nozzle. The cartridges stand nozzle-down in 54 mm cups with 14 mm nozzle holes so the sealant stays at the tip, in a 340 mm long row with a 45 degree cleat for 19 mm plywood. Print upright in PETG.
600 ml sausage packs are wider and softer and do not stand in these cups. Open the rack in SpeakCAD at no cost, change the count in the viewer or the chat, then download the STL.
People also search
caulk tube holdersilicone cartridge rack stlcaulk storage 3d printsealant tube wall rack
Questions people ask about a french cleat rack for 310 ml caulk cartridges
A rack for six standard 310 ml caulk and sealant cartridges, about 50 mm across and 215 mm long with the nozzle. The cartridges stand nozzle-down in 54 mm cups with 14 mm nozzle holes so the sealant stays at the tip, in a 340 mm long row with a 45 degree cleat for 19 mm plywood. Print upright in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a French cleat caulk tube rack, six 54 mm cups with 14 mm nozzle holes, 340 mm long, 45 degree cleat for 19 mm plywood, PETG.
600 ml sausage packs are wider and softer and do not stand in these cups. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Ninja Creami pint lid and cup holder rackA rack that stores the spare pint containers and lids for a Ninja Creami NC300 or NC500 so they are not stacked loose in the freezer door.SMD reel holder 8, 12 and 16 mmA bench stand that holds three SMD reels (8, 12, 16 mm tape) on 12 mm axles with 0.3 mm flanges.IKEA BROR pegboard hook adapterAn adapter that lets a 6 mm pegboard hook sit in the BROR side-panel holes (about 10 mm) so you can hang tools on the trolley.Tesla Model 3 Highland key card console holderA slim holder for a spare Tesla key card (credit-card size, 85.6 × 54 × 0.8 mm) that sticks inside the Model 3 Highland centre console so the card is always…French cleat shelf for a Stanley No. 4 hand planeA plane shelf for a Stanley or Record No.Glasses stand for several pairs of spectaclesA tiered stand that holds reading glasses, sunglasses and spare frames open-armed, lenses facing out and never touching a surface.