1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Organizers & storage
KitchenAid sausage-stuffer tube rack
This is not a fixed STL. SpeakCAD generates the kitchenaid sausage-stuffer tube rack to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a kitchenaid sausage-stuffer tube rack is
A rack that holds the three KitchenAid stuffer tubes (10, 19, 32 mm) upright by the hub so they dry. The base is 140 × 50 mm with 12 mm bores. Print in PETG.
Tubes in a drawer stay wet. In SpeakCAD you add the grinder, preview the rack in the browser for free, then download the STL.
Example prompt
Create a stuffer-tube rack 140×50×40 mm with 12 mm bores for 10, 19 and 32 mm tubes, 1.6 mm PETG.
People also search
kitchenaid stuffer rack stlsausage tube holder 3d printkitchenaid grinder tube standstuffer tube drying rack 3d model
Questions people ask about a kitchenaid sausage-stuffer tube rack
A rack that holds the three KitchenAid stuffer tubes (10, 19, 32 mm) upright by the hub so they dry. The base is 140 × 50 mm with 12 mm bores. Print in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a stuffer-tube rack 140×50×40 mm with 12 mm bores for 10, 19 and 32 mm tubes, 1.6 mm PETG.
Tubes in a drawer stay wet. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
RIDGID Pro Gear stack bit caddyA caddy that drops into a RIDGID Pro Gear stack drawer and holds 40 hex bits in 6.6 mm pockets plus two 12 mm driver shafts.Dyson Big+Quiet Formaldehyde remote cradleA cradle that holds the larger Big+Quiet Formaldehyde remote (about 130 × 50 × 14 mm) on the top of the cylinder so it does not slide off the curved lid.DeWalt TSTAK deep-box divider setDividers that split a TSTAK deep box into four 150 × 140 mm wells for fittings.Glasses stand for several pairs of spectaclesA tiered stand that holds reading glasses, sunglasses and spare frames open-armed, lenses facing out and never touching a surface.Festool Systainer insert for Domino cutters and drill bitsA foam-free insert that sits in the bottom of a Festool Systainer SYS3 M 137 and keeps Domino DF 500 cutters, spare bits and the wrench in fixed pockets.Dr. Brown's bottle vent and insert organizer trayA tray that gives the many small parts of Dr.