1
Organizers & storage
Creality Ender-3 V3 SE scraper holder
This is not a fixed STL. SpeakCAD generates the creality ender-3 v3 se scraper holder to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a scraper holder for a 2040 extrusion, 25 mm wide sleeve, 70×3 mm blade slot, two M5 holes 20 mm apart for T-nuts, needle hook.
What a creality ender-3 v3 se scraper holder is
A holder that bolts onto the 2040 upright of a Creality Ender-3 V3 SE and keeps the scraper within reach. It is a 25 mm wide sleeve with a 70 × 3 mm slot for the blade, two M5 holes 20 mm apart for drop-in T-nuts, and a small hook underneath for the nozzle cleaning needle. Print in PETG, on its back.
The Ender-3 V3 (CoreXZ) is a boxed frame without exposed extrusions, so this bolt pattern is for the SE and KE. Open the holder in SpeakCAD for free, resize the slot for your scraper in the viewer or the chat, then download the STL.
People also search
ender 3 v3 se scraper holder stlender 3 scraper holder 2040v3 se spatula holderender 3 v3 se accessories 3d print
Questions people ask about a creality ender-3 v3 se scraper holder
A holder that bolts onto the 2040 upright of a Creality Ender-3 V3 SE and keeps the scraper within reach. It is a 25 mm wide sleeve with a 70 × 3 mm slot for the blade, two M5 holes 20 mm apart for drop-in T-nuts, and a small hook underneath for the nozzle cleaning needle. Print in PETG, on its back.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a scraper holder for a 2040 extrusion, 25 mm wide sleeve, 70×3 mm blade slot, two M5 holes 20 mm apart for T-nuts, needle hook.
The Ender-3 V3 (CoreXZ) is a boxed frame without exposed extrusions, so this bolt pattern is for the SE and KE. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Tesla Model 3 Highland key card console holderA slim holder for a spare Tesla key card (credit-card size, 85.6 × 54 × 0.8 mm) that sticks inside the Model 3 Highland centre console so the card is always…French cleat shelf for a Stanley No. 4 hand planeA plane shelf for a Stanley or Record No.Entryway catch-all tray for keys and walletA low rectangular dish for the hallway table that corrals keys, wallet, earbuds and coins as you walk in.Tesla Model 3 center console organizer tray insertA tray that drops into the deep front cubby of the 2021 onward Tesla Model 3 and Model Y center console and splits it into a coin well, a key card slot, a su…RIDGID Pro Gear stack bit caddyA caddy that drops into a RIDGID Pro Gear stack drawer and holds 40 hex bits in 6.6 mm pockets plus two 12 mm driver shafts.IKEA BROR shelf end-stop pairA pair of end stops that keep bins from sliding off a BROR shelf (about 85 or 110 cm) when you roll the unit.