1
Organizers & storage
French cleat dispenser for 125 mm sanding discs
This is not a fixed STL. SpeakCAD generates the french cleat dispenser for 125 mm sanding discs to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a French cleat sanding disc dispenser, four 128 mm bore tubes 110 mm tall, 70 mm bottom window, 45 degree cleat for 19 mm plywood.
What a french cleat dispenser for 125 mm sanding discs is
A wall dispenser for 125 mm (5 inch) hook-and-loop sanding discs, one tube per grit. Each tube has a 128 mm bore, 110 mm tall, with a 70 mm window at the bottom so the lowest disc slides out, and four tubes share a 45 degree cleat for 19 mm plywood. Print the tubes upright in PLA with 1.2 mm walls.
150 mm discs for Festool and Mirka sanders need a bigger bore. The model opens free in SpeakCAD; any millimetre can be changed in the viewer or the chat before the STL download.
People also search
sanding disc holdersanding disc dispenser stl125mm sanding disc storagesandpaper disc organizer 3d print
Questions people ask about a french cleat dispenser for 125 mm sanding discs
A wall dispenser for 125 mm (5 inch) hook-and-loop sanding discs, one tube per grit. Each tube has a 128 mm bore, 110 mm tall, with a 70 mm window at the bottom so the lowest disc slides out, and four tubes share a 45 degree cleat for 19 mm plywood. Print the tubes upright in PLA with 1.2 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a French cleat sanding disc dispenser, four 128 mm bore tubes 110 mm tall, 70 mm bottom window, 45 degree cleat for 19 mm plywood.
150 mm discs for Festool and Mirka sanders need a bigger bore. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Bose QC Ultra 2 travel case insertA drop-in insert that turns a generic hard case into a Bose QC Ultra 2 (about 170 × 170 × 80 mm folded) nest with a 40 × 20 mm well for the USB-C cable and a…Dyson Supersonic nozzle magnetic caddyA caddy that holds the four Supersonic magnetic nozzles (styling, diffuser, wide-tooth, flyaway) so they stay in one place next to the charger.Prusa XL toolchanger nozzle caddyA caddy that holds five XL Nextruder nozzles (0.25–0.8 mm) in labelled 8 mm wells so they are not mixed with MK4S ObXidian tips.XLR cable wall hanger with five saddlesA studio wall hanger for coiled XLR and instrument cables.Gridfinity bin for SDS-plus drill bitsA 3 × 2 Gridfinity bin (125.5 × 83.5 mm, 6 units tall) for SDS-plus masonry bits, whose shanks are 10 mm across.Raspberry Pi HAT storage rack with labelled slotsA vertical rack that stores Raspberry Pi HATs, pHATs and GPIO expansion boards on their edge so pins are not bent in a drawer.