1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Organizers & storage
SMD reel holder 8, 12 and 16 mm
This is not a fixed STL. SpeakCAD generates the smd reel holder 8, 12 and 16 mm to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a smd reel holder 8, 12 and 16 mm is
A bench stand that holds three SMD reels (8, 12, 16 mm tape) on 12 mm axles with 0.3 mm flanges. The base is 120 × 50 mm. Print in PLA.
Reels on their side unwind into a nest. In SpeakCAD you add 24 mm if you need it, preview the stand in the browser without paying, then download the STL.
Example prompt
Model an SMD reel stand 120×50×40 mm with 12 mm axles for 8, 12 and 16 mm tape, 0.3 mm flanges and 1.6 mm walls.
People also search
smd reel holder stl8mm 12mm 16mm reel stand 3d printpick and place reel holdersmd tape reel organizer 3d model
Questions people ask about a smd reel holder 8, 12 and 16 mm
A bench stand that holds three SMD reels (8, 12, 16 mm tape) on 12 mm axles with 0.3 mm flanges. The base is 120 × 50 mm. Print in PLA.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model an SMD reel stand 120×50×40 mm with 12 mm axles for 8, 12 and 16 mm tape, 0.3 mm flanges and 1.6 mm walls.
Reels on their side unwind into a nest. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Raspberry Pi Pico breadboard holder with jumper wire trayA baseplate that holds a half-size breadboard and a Raspberry Pi Pico side by side, with a tray for the jumper wires that otherwise end up in a knot.Stanley and Yeti tumbler lid organizer for the cabinetA rack that stands tumbler lids on edge in a kitchen cabinet so the Stanley Quencher, Yeti Rambler and Hydro Flask lids stop sliding around and losing their…Milwaukee Packout Compact Organizer bit railsTwo drop-in rails that turn a Packout Compact Organizer (48-22-8435) into a 1/4 inch hex-bit station with 20 pockets per rail, 6.6 mm hex by 12 mm deep.Apple TV Siri Remote 3rd-gen trayA tray that parks a 3rd-gen Siri Remote (about 136 × 35 × 9 mm) plus a spare USB-C cable so the remote does not vanish between sofa cushions.IKEA PAX KOMPLEMENT 50 cm tray dividerA divider that splits a 50 cm KOMPLEMENT pull-out tray (about 464 mm internal) for belts and ties.Weekly pill organizer with hinged lidsSeven compartments, one per day, each with its own print-in-place hinged lid that snaps shut with a small catch.