1
Organizers & storage
Hair tie and claw clip organizer stand
A bathroom counter stand with a vertical 25 mm post for stacking elastic hair ties, a slotted rail that grips claw clips by their hinges, and a small cup for bobby pins. The post has a 30 mm cap so ties stay put, the rail slots are 4 mm wide with 0.5 mm clearance, and the pin cup is 40 mm across with a magnet pocket in the floor for a 10 x 3 mm disc. Everything prints upright with 1.6 mm walls. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| base plate length (x) | 150 mm |
| base plate width (y) | 90 mm |
| base plate thickness | 6 mm |
| post diameter | 25 mm |
| post height | 120 mm |
| cap sphere diameter | 30 mm |
| clip rail length | 120 mm |
| clip rail width (y) | 14 mm |
| clip rail height (z) | 8 mm |
| height of rail center on post | 60 mm |
| slot width | 4 mm |
| slot depth (from top) | 5 mm |
| cup inner diameter | 40 mm |
| cup interior depth | 30 mm |
Example prompt
Make a hair accessory stand with a 25 mm post 120 mm tall topped by a 30 mm cap, a 120 mm clip rail with six 4 mm slots, a 40 mm cup 30 mm deep with a 10 x 3 mm magnet pocket, 1.6 mm walls.
Fit notes
Rather than compromise on a design meant for someone else's collection, describe your own to SpeakCAD: how many ties, how many clips, how much counter space. The organizer appears in your browser, you adjust post height or add a second rail by replying, and you only download the STL you will actually print.
Questions people ask about a hair tie and claw clip organizer stand
A bathroom counter stand with a vertical 25 mm post for stacking elastic hair ties, a slotted rail that grips claw clips by their hinges, and a small cup for bobby pins. The post has a 30 mm cap so ties stay put, the rail slots are 4 mm wide with 0.5 mm clearance, and the pin cup is 40 mm across with a magnet pocket in the floor for a 10 x 3 mm disc. Everything prints upright with 1.6 mm walls.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More organizers & storage
Bambu Lab AMS desiccant holder tray for silica beadsReady-made, opens free. A vented tray that clips into the unused floor space at the front of the Bambu Lab AMS, between the spool rollers, and holds about 60 g of loose silica gel b…Sony NP-FZ100 battery case for four batteriesReady-made, opens free. A pocketable case that holds four Sony NP-FZ100 batteries, the 38.7 x 22.7 x 51.7 mm pack used by the A7 IV, A7 III, A6700 and A1, in labelled bays with a fl…Festool Systainer3 M 187 oscillator insertReady-made, opens free. A two-part insert for a Systainer3 M 187 that holds a Vecturo or OSC 18, five blades in 2 mm slots, and the charger.LEGO Technic gear-tray insertReady-made, opens free. A tray insert that sorts Technic gears by tooth count in labelled wells (8, 12, 16, 20, 24, 40).Charging cable organizer with wrap postsReady-made, opens free. A flat plate with staggered posts that lets you coil USB-C, Lightning and micro-USB cables in figure eights and park the connectors in labelled pockets so th…Apple Pencil Pro desk tray with USB-C adapter pocketReady-made, opens free. A desk tray that stores an Apple Pencil Pro or 2nd generation (166 mm long, 8.9 mm across) in a half-round groove, with a second groove for the shorter Apple…