1
Organizers & storage
Sony NP-FZ100 battery case for four batteries
A pocketable case that holds four Sony NP-FZ100 batteries, the 38.7 x 22.7 x 51.7 mm pack used by the A7 IV, A7 III, A6700 and A1, in labelled bays with a flip-lid so you always know which cells are charged. Each bay is 39.3 x 23.3 mm with 0.3 mm clearance and a fingernail slot at one end, and the lid has a rotating charged/empty indicator dot above each bay printed in a contrasting colour. The 1.6 mm walls, 3 mm base and print-in-place hinge with a 3 mm pin make the case sturdy enough for a camera bag pocket, and two 6 x 2 mm magnets keep it shut. Print it lid-open in a single job. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| wall thickness | 1.6 mm |
| floor thickness | 3 mm |
Example prompt
Model a battery case for four Sony NP-FZ100 batteries with 39.3 x 23.3 x 52 mm bays and 0.3 mm clearance, fingernail slots, 1.6 mm walls, 3 mm base, a print-in-place hinged lid with a 3 mm pin, two 6 x 2 mm magnet pockets and four 8 mm rotating indicator dots in the lid.
Fit notes
A case built for one battery count is useless when you buy a fifth. Tell SpeakCAD how many NP-FZ100 or NP-FW50 cells you carry and whether you want SD slots too, preview it in the browser, refine in the chat and download the STL.
Questions people ask about a Sony NP-FZ100 battery case for four batteries
A pocketable case that holds four Sony NP-FZ100 batteries, the 38.7 x 22.7 x 51.7 mm pack used by the A7 IV, A7 III, A6700 and A1, in labelled bays with a flip-lid so you always know which cells are charged. Each bay is 39.3 x 23.3 mm with 0.3 mm clearance and a fingernail slot at one end, and the lid has a rotating charged/empty indicator dot above each bay printed in a contrasting colour. The 1.6 mm walls, 3 mm base and print-in-place hinge with a 3 mm pin make the case sturdy enough for a camera bag pocket, and two 6 x 2 mm magnets keep it shut. Print it lid-open in a single job.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More organizers & storage
Entryway catch-all tray for keys and walletReady-made, opens free. A low rectangular dish for the hallway table that corrals keys, wallet, earbuds and coins as you walk in.Raspberry Pi HAT storage rack with labelled slotsReady-made, opens free. A vertical rack that stores Raspberry Pi HATs, pHATs and GPIO expansion boards on their edge so pins are not bent in a drawer.Prusa MK4 nozzle storage box for Nextruder and V6 nozzlesReady-made, opens free. A hinged box that keeps Prusa Nextruder nozzles, the V6 adapter nozzles and a couple of Obxidian and high-flow nozzles sorted by size instead of loose in a bag.Fujifilm X100VI 49 mm filter and lens cap holderReady-made, opens free. A desk or bag organizer for the small kit that the Fujifilm X100VI and X100V accumulate: the AR-X100 adapter ring, two or three 49 mm filters and the slip-on…DeWalt TSTAK VI oscillating-tool insertReady-made, opens free. An insert for a TSTAK VI deep box that holds a DCS356, eight blades in 2 mm slots, and the charger.Roland SP-404MKII SD-card caddyReady-made, opens free. A caddy that clips under an SP-404MKII and holds four SD cards in 33 × 3 mm slots plus a 20 mm stylus well.