1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Organizers & storage
Gridfinity 5×4 magnet-only baseplate
This is not a fixed STL. SpeakCAD generates the gridfinity 5×4 magnet-only baseplate to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a gridfinity 5×4 magnet-only baseplate is
A 5 by 4 Gridfinity baseplate (210 × 168 mm) with 6 × 2 mm magnet pockets and no screw holes, for a drawer that cannot be drilled. Each 42 mm cell has the standard stacking lip. Print as two 3×4 and 2×4 plates in PLA so they fit a 220 mm bed.
A full-size plate will not fit most printers. In SpeakCAD you set the grid, preview the split in the browser without paying, then download the STL.
Example prompt
Model a Gridfinity 5×4 baseplate 210×168 mm split into 3×4 and 2×4, 6×2 mm magnet pockets, standard 42 mm lip, 1.2 mm walls, no screw holes.
People also search
gridfinity 5x4 baseplate stlgridfinity magnet base 3d printgridfinity drawer baseplate5x4 gridfinity plate 3d model
Questions people ask about a gridfinity 5×4 magnet-only baseplate
A 5 by 4 Gridfinity baseplate (210 × 168 mm) with 6 × 2 mm magnet pockets and no screw holes, for a drawer that cannot be drilled. Each 42 mm cell has the standard stacking lip. Print as two 3×4 and 2×4 plates in PLA so they fit a 220 mm bed.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a Gridfinity 5×4 baseplate 210×168 mm split into 3×4 and 2×4, 6×2 mm magnet pockets, standard 42 mm lip, 1.2 mm walls, no screw holes.
A full-size plate will not fit most printers. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Philips Sonicare brush head stand for four headsA stand that holds four Philips Sonicare brush heads upright next to the charger so each family member's head dries in the air rather than lying on the sink.IKEA SKÅDIS holder for Makita impact bitsA SKÅDIS pegboard plate with 15 hex pockets 6.6 mm across and two 5 mm SKÅDIS hooks on 40 mm centres.Dyson Supersonic r travel-pouch insertAn insert that keeps a Supersonic r and two nozzles from grinding in the official travel pouch.Festool Domino DF 700 tenon caddyA caddy that holds DF 700 tenons (8, 10, 12, 14 mm) in labelled wells so they are not mixed with DF 500 stock.Hair tie and claw clip organizer standA bathroom counter stand with a vertical 25 mm post for stacking elastic hair ties, a slotted rail that grips claw clips by their hinges, and a small cup for…DeWalt ToughSystem drill bit index insert 1 to 13 mmA stepped drill bit index that drops into the small removable cup of a DeWalt ToughSystem 2.0 organizer (DWST08020) and holds a full metric set from 1 to 13…