iPad and iPhone family charging station rack with cable slots
A countertop rack with upright slots for two iPads and three iPhones, so the family devices charge in one place overnight. The tablet slots are 12 mm wide for an iPad 10th gen or iPad Air in a case, the phone slots are 10 mm wide for an iPhone 16 or Galaxy S25 in a case, and each slot has an 8 mm cable pass-through in the floor leading to a rear bay 70 x 70 x 30 mm sized for a four-port Anker or Belkin charger. The rack is 220 x 130 x 60 mm with 2.5 mm walls and prints upright.
A rack downloaded for someone else's devices has the wrong slot count and no room for your charger brick. In SpeakCAD you list the devices and the charger you use, preview the rack free in the browser, rearrange the slots in the chat, then download the STL.
Model a 220 x 130 x 60 mm charging rack with two 12 mm slots for cased iPads and three 10 mm slots for cased iPhones spaced 30 mm apart, an 8 mm cable hole under each slot, a rear bay 70 x 70 x 30 mm for a four-port charger, 2.5 mm walls and rubber foot recesses.