Makita MakPac type 2 insert for impact bit cases
A shallow tray for the Makita MakPac Type 2 case (about 395 by 295 mm inside, 105 mm deep) that holds two Makita impact bit cases, a set of 1/4 inch hex nut setters and loose PZ2 bits beside a DTD153 impact driver. The tray is 40 mm tall with a 2 mm floor and 2 mm walls, printed as two 197 mm halves that hook together with a 10 mm tab. Nut setters stand in 12.5 mm bores 25 mm deep; loose bits sit in 6.6 mm hex pockets; the bit cases sit in rectangular wells with 2 mm clearance and a finger notch on each end.
Makita bundles change and no download matches your particular case contents. With SpeakCAD you describe the case, the tools and the bit boxes, preview the tray in the browser without paying, shift a pocket in the chat, and download the STL for PETG.
Model a two-half MakPac Type 2 tray totalling 393 by 293 mm, 40 mm tall, with 2 mm floor and walls, a 165 by 80 mm driver well, two 130 by 55 mm bit case wells with 2 mm clearance, ten 12.5 mm bores 25 mm deep, twenty-four 6.6 mm hex pockets and a 10 mm joining tab.