Smartwatch charger cable organizer for Garmin Fitbit and Whoop
A tray with three bays that keeps a Garmin four-pin clip, a Fitbit Charge 6 charging clip and a Whoop 4.0 battery pack each in its own pocket with the cable wound around a post, so the charger you need is not knotted with the other two. The bays are 45 x 30 x 15 mm, 35 x 25 x 12 mm and 20 x 12 x 10 mm, each with a 10 mm wrap post and a 4 mm cable exit, in a 140 x 60 x 20 mm tray with 2 mm walls that prints open face up.
Wearable chargers are all proprietary and all small, so a downloaded organizer never has pockets for your exact set. In SpeakCAD you list the chargers you own with rough measurements, preview the tray free in the browser, resize or add a bay for a Pixel Watch puck in the chat, then download the STL.
Create a 140 x 60 x 20 mm organizer tray with three pockets of 45 x 30 x 15 mm, 35 x 25 x 12 mm and 20 x 12 x 10 mm for wearable chargers, a 10 mm diameter cable wrap post beside each pocket, 4 mm cable exit slots, 2 mm walls and 1 mm fillets.