1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Organizers & storage
Makita MAKPAC Type 2 impact-driver insert
This is not a fixed STL. SpeakCAD generates the makita makpac type 2 impact-driver insert to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a makita makpac type 2 impact-driver insert is
A Type 2 MAKPAC insert that holds an 18V LXT impact driver, a battery, and a 10-bit rail. The well is 190 × 80 × 70 mm with 0.5 mm clearance around the belt hook. Print in two halves in PLA.
The stock tray is for a drill, not the stubby impact. Describe the driver in SpeakCAD, preview the insert in the browser at no cost, then download the STL.
Example prompt
Design a MAKPAC Type 2 insert with a 190×80×70 mm driver well, 0.5 mm clearance, a battery well and a 10-bit rail, two PLA halves, 2 mm floor.
People also search
makpac type 2 insert stlmakita impact driver case insert 3d printmakpac 18v organizermakita makpac insert 3d model
Questions people ask about a makita makpac type 2 impact-driver insert
A Type 2 MAKPAC insert that holds an 18V LXT impact driver, a battery, and a 10-bit rail. The well is 190 × 80 × 70 mm with 0.5 mm clearance around the belt hook. Print in two halves in PLA.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a MAKPAC Type 2 insert with a 190×80×70 mm driver well, 0.5 mm clearance, a battery well and a 10-bit rail, two PLA halves, 2 mm floor.
The stock tray is for a drill, not the stubby impact. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Raspberry Pi Pico breadboard holder with jumper wire trayA baseplate that holds a half-size breadboard and a Raspberry Pi Pico side by side, with a tray for the jumper wires that otherwise end up in a knot.Stanley and Yeti tumbler lid organizer for the cabinetA rack that stands tumbler lids on edge in a kitchen cabinet so the Stanley Quencher, Yeti Rambler and Hydro Flask lids stop sliding around and losing their…Milwaukee Packout Compact Organizer bit railsTwo drop-in rails that turn a Packout Compact Organizer (48-22-8435) into a 1/4 inch hex-bit station with 20 pockets per rail, 6.6 mm hex by 12 mm deep.Apple TV Siri Remote 3rd-gen trayA tray that parks a 3rd-gen Siri Remote (about 136 × 35 × 9 mm) plus a spare USB-C cable so the remote does not vanish between sofa cushions.IKEA PAX KOMPLEMENT 50 cm tray dividerA divider that splits a 50 cm KOMPLEMENT pull-out tray (about 464 mm internal) for belts and ties.Weekly pill organizer with hinged lidsSeven compartments, one per day, each with its own print-in-place hinged lid that snaps shut with a small catch.