Apple Watch band organizer drawer insert with lug rails
A drawer insert with a row of rails that copy the Apple Watch case slot, so Sport, Solo Loop and Braided bands for 42, 44, 45, 46 and 49 mm watches slide on by their lugs and hang side by side. Each rail is 25 mm long with a 3.2 mm groove for the band connector, spaced 30 mm apart, and a 20 mm gap below lets the strap ends lie flat in the drawer. The insert is 200 x 40 x 30 mm with 2 mm walls and prints upright with the rails facing up.
Bands in a bowl scratch each other and take twice the space. In SpeakCAD you say how many bands and which case size you have, preview the insert free in the browser, add rails for a Galaxy Watch or Pixel Watch in the chat, then download the STL sized to your drawer.
Design a 200 x 40 x 30 mm drawer insert with six Apple Watch band rails 25 mm long and 3.2 mm thick spaced 30 mm apart, each rail having a 24.5 mm wide lug slot with 0.3 mm clearance, a 20 mm hanging gap below and 2 mm walls.