1
Organizers & storage
Insta360 X4 travel case insert
This is not a fixed STL. SpeakCAD generates the insta360 x4 travel case insert to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a 150×90×45 mm case insert for an Insta360 X4, 48×126×40 mm camera pocket, 40×30 mm battery pocket, lens guard pocket, two microSD slots.
What a insta360 x4 travel case insert is
An insert that turns a small box into a travel case for an Insta360 X4 (46 × 123.6 × 37.6 mm) and its kit. The camera pocket is 48 × 126 × 40 mm with a 5 mm domed relief at both lenses, next to it sit a 40 × 30 mm pocket for a spare battery, a 20 mm round pocket for the lens guards and two microSD slots. The insert is 150 × 90 × 45 mm. Print flat in PETG.
The X3 fits loosely, and the X5 is a little larger; tell the chat which model you carry. Open the ready-made model in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
insta360 x4 case stlinsta360 x4 travel case 3d printx4 storage insertinsta360 x4 box
Questions people ask about a insta360 x4 travel case insert
An insert that turns a small box into a travel case for an Insta360 X4 (46 × 123.6 × 37.6 mm) and its kit. The camera pocket is 48 × 126 × 40 mm with a 5 mm domed relief at both lenses, next to it sit a 40 × 30 mm pocket for a spare battery, a 20 mm round pocket for the lens guards and two microSD slots. The insert is 150 × 90 × 45 mm. Print flat in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a 150×90×45 mm case insert for an Insta360 X4, 48×126×40 mm camera pocket, 40×30 mm battery pocket, lens guard pocket, two microSD slots.
The X3 fits loosely, and the X5 is a little larger; tell the chat which model you carry. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
French cleat rack for box spirit levelsA French cleat rack for four box-section spirit levels from 600 to 1200 mm, up to about 32 mm thick and 70 mm tall.Charging cable organizer with wrap postsA flat plate with staggered posts that lets you coil USB-C, Lightning and micro-USB cables in figure eights and park the connectors in labelled pockets so th…Bosch L-Boxx 136 insert for GSR 12V drill kitA replacement inlay for the Bosch Professional L-Boxx 136 (Sortimo L-BOXX 136) that cradles a GSR 12V-35 drill, two GBA 12V batteries, the GAL 12V charger an…Gridfinity 2×1 bin for Leatherman Wave PlusA 2×1 Gridfinity bin (84 × 42 mm, 6U) with a 105 × 18 × 18 mm well that a Wave Plus drops into closed, plus a 12 mm slot for a bit kit.IKEA PAX 60 cm drawer dividerA divider that splits a 60 cm PAX/KOMPLEMENT drawer (about 564 mm internal) into two 280 mm wells for folded tees.Creality K2 Plus CFS PTFE guide clipA clip that keeps the four 4 mm PTFE tubes from a Creality CFS in order on their way to a K2 Plus, so they cannot kink behind the printer or knock off the bu…