1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Organizers & storage
Gridfinity 2×1 bin for Leatherman Wave Plus
This is not a fixed STL. SpeakCAD generates the gridfinity 2×1 bin for leatherman wave plus to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a gridfinity 2×1 bin for leatherman wave plus is
A 2×1 Gridfinity bin (84 × 42 mm, 6U) with a 105 × 18 × 18 mm well that a Wave Plus drops into closed, plus a 12 mm slot for a bit kit. The well has 0.4 mm clearance so the pliers do not rattle. Print in PETG.
A 1×1 bin is too short for the Wave. In SpeakCAD you pick Wave or Charge, preview the bin in the browser at no cost, then download the STL.
Example prompt
Design a Gridfinity 2×1 6U bin 84×42×42 mm with a 105×18×18 mm Wave Plus well, 0.4 mm clearance, a 12 mm bit-kit slot and 1.6 mm walls.
People also search
gridfinity leatherman bin stlwave plus gridfinity holder 3d printleatherman wave organizergridfinity multitool bin 3d model
Questions people ask about a gridfinity 2×1 bin for leatherman wave plus
A 2×1 Gridfinity bin (84 × 42 mm, 6U) with a 105 × 18 × 18 mm well that a Wave Plus drops into closed, plus a 12 mm slot for a bit kit. The well has 0.4 mm clearance so the pliers do not rattle. Print in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a Gridfinity 2×1 6U bin 84×42×42 mm with a 105×18×18 mm Wave Plus well, 0.4 mm clearance, a 12 mm bit-kit slot and 1.6 mm walls.
A 1×1 bin is too short for the Wave. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Sony WH-1000XM6 travel-case insertAn insert that keeps XM6 cups from grinding in the official case, with two 90 mm cup wells and a 20 mm cable trough.SIM eject tool and nano SIM card holder keychainA keychain tag that stores a SIM eject pin and up to two spare nano SIM cards (12.3 x 8.8 x 0.67 mm) for travel, so swapping an eSIM-less iPhone 15 or Galaxy…Makita MakPac type 2 insert for impact bit casesA shallow tray for the Makita MakPac Type 2 case (about 395 by 295 mm inside, 105 mm deep) that holds two Makita impact bit cases, a set of 1/4 inch hex nut…DJI Mini 4 Pro ND filter case with six slotsA pocket case for the snap-on ND filters used by the DJI Mini 4 Pro and Mini 3 Pro, which measure roughly 25 x 24 mm and 8 mm deep including the clip and are…ESD bin label holder 60 mmA 60 × 20 mm clip-on label holder for conductive bins with a 1.2 mm card slot and a 4 mm lip that hangs on a 2 mm bin rim.IKEA SKÅDIS 65 mm spray-can holderA SKÅDIS peg that holds a 65 mm spray can (paint, dry lube, contact cleaner) so it is not on the bench.