1
Organizers & storage
Elegoo Neptune 4 Pro scraper holder
This is not a fixed STL. SpeakCAD generates the elegoo neptune 4 pro scraper holder to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a scraper holder for a Neptune 4 Pro, 70×3 mm blade slot 40 mm deep, 35×15 mm pliers pocket, two M5 holes 20 mm apart.
What a elegoo neptune 4 pro scraper holder is
A scraper holder that bolts to the side of a Neptune 4 Pro upright with M5 T-nuts, so the spatula and the pliers stay by the printer. It has a 70 × 3 mm blade slot 40 mm deep, a 35 × 15 mm pliers pocket, two M5 holes 20 mm apart and 2.4 mm walls. Print in PETG, back down.
The Centauri Carbon is enclosed with no exposed extrusion, so this bolt-on holder is for the Neptune line. Open the holder in SpeakCAD for free, resize the slots in the viewer or the chat, then download the STL.
People also search
neptune 4 pro scraper holder stlneptune 4 tool holderelegoo neptune spatula holderneptune 4 pro accessories 3d print
Questions people ask about a elegoo neptune 4 pro scraper holder
A scraper holder that bolts to the side of a Neptune 4 Pro upright with M5 T-nuts, so the spatula and the pliers stay by the printer. It has a 70 × 3 mm blade slot 40 mm deep, a 35 × 15 mm pliers pocket, two M5 holes 20 mm apart and 2.4 mm walls. Print in PETG, back down.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a scraper holder for a Neptune 4 Pro, 70×3 mm blade slot 40 mm deep, 35×15 mm pliers pocket, two M5 holes 20 mm apart.
The Centauri Carbon is enclosed with no exposed extrusion, so this bolt-on holder is for the Neptune line. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Dyson Airwrap smoothing-brush caddyA caddy that holds the firm and soft Airwrap smoothing brushes plus the flyaway attachment in labelled wells so the magnets do not click together in a drawer.Framework 13 HDMI-module trayA tray that stores four Framework 13 expansion cards (HDMI, USB-C, USB-A, Ethernet) in 32 × 16 mm wells so they are not in a bag.XLR cable wall hanger with five saddlesA studio wall hanger for coiled XLR and instrument cables.Gridfinity 5 × 5 baseplate for Ender 3 size bedsA 5 × 5 Gridfinity baseplate, 210 × 210 mm, that fits the 220 × 220 mm bed of an Ender 3, Ender 3 V3 SE or Prusa MK4 in one print.21700 battery storage tray for 8 cells with polarity marksA desktop tray that keeps eight 21700 lithium cells upright and separated, handy for vape, torch, power bank and e-bike battery projects.Canon LP-E6 battery holder with SD card slotsA camera-bag organizer that carries three Canon LP-E6, LP-E6N or LP-E6NH batteries, the 38.4 x 21 x 56.8 mm pack shared by the EOS R6, R6 Mark II, R5 and 5D…