1
Organizers & storage
French cleat holder for a Japanese ryoba pull saw
This is not a fixed STL. SpeakCAD generates the french cleat holder for a japanese ryoba pull saw to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a French cleat pull saw holder, 270×30 mm block, 3 mm blade slot 60 mm deep with 1.5 mm chamfer, 30 mm handle cradle.
What a french cleat holder for a japanese ryoba pull saw is
A holder for a 240 mm ryoba or kataba pull saw such as the Gyokucho Razor, whose blade is about 0.6 mm thick and 110 mm tall. The blade drops into a 3 mm slot, 60 mm deep with a 1.5 mm chamfer so the teeth are not dulled, and the handle rests against a 30 mm cradle. The block is 270 × 30 mm with a 45 degree cleat for 19 mm plywood. Print on its side in PLA.
A dozuki has a stiff spine that is wider than 3 mm and will not go in. Open the ready-made holder in SpeakCAD for free, change the slot in the viewer or the chat, then download the STL.
People also search
japanese saw holderryoba saw wall mount stlpull saw storagegyokucho saw holder 3d print
Questions people ask about a french cleat holder for a japanese ryoba pull saw
A holder for a 240 mm ryoba or kataba pull saw such as the Gyokucho Razor, whose blade is about 0.6 mm thick and 110 mm tall. The blade drops into a 3 mm slot, 60 mm deep with a 1.5 mm chamfer so the teeth are not dulled, and the handle rests against a 30 mm cradle. The block is 270 × 30 mm with a 45 degree cleat for 19 mm plywood. Print on its side in PLA.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a French cleat pull saw holder, 270×30 mm block, 3 mm blade slot 60 mm deep with 1.5 mm chamfer, 30 mm handle cradle.
A dozuki has a stiff spine that is wider than 3 mm and will not go in. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Small parts sorting bins with label slotOpen-fronted bins for screws, nuts, LEDs, beads or any tiny hardware that otherwise ends up loose in a jar.DeWalt ToughSystem drill bit index insert 1 to 13 mmA stepped drill bit index that drops into the small removable cup of a DeWalt ToughSystem 2.0 organizer (DWST08020) and holds a full metric set from 1 to 13…Prusa MK4S ObXidian nozzle-swap caddyA bench caddy that holds six MK4S / Nextruder nozzles (Cht, ObXidian, brass) in 10 mm hex pockets 12 mm deep plus a 8 mm well for the nozzle wrench.Dyson Supersonic r travel-pouch insertAn insert that keeps a Supersonic r and two nozzles from grinding in the official travel pouch.Bambu Lab A1 mini side spool roller standA low roller stand that sits next to an A1 mini so the spool feeds from the side rather than from the top of the Z column, handy for heavy 1 kg spools and ca…IKEA SKADIS metric hex key holder, 1.5 to 10 mmA SKADIS block for a full metric L-key set: 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10 mm.