Philips Sonicare brush head stand for four heads
A stand that holds four Philips Sonicare brush heads upright next to the charger so each family member's head dries in the air rather than lying on the sink. The Sonicare head base has a hollow bore around 9 mm across, so each peg is 8.5 mm in diameter and 25 mm tall with a rounded tip, and a 16 mm cup at the base catches drips. Pegs sit on 25 mm centres on a 110 by 35 mm base with a 3 mm lip and a rear drain slot. Walls are 1.6 mm, and it prints upright.
Oral-B heads use a different bore, and families of two or six need different peg counts, so a stand generated to your brush and household fits better than a fixed download. In SpeakCAD you name the brush and head count, preview the stand in the browser at no cost, add a cover in the chat and download the STL.
Model a brush head stand 110 mm long, 35 mm wide and 30 mm tall with four 8.5 mm pegs 25 mm tall with 1 mm rounded tips on 25 mm centres, a 16 mm drip cup around each peg, a 3 mm base lip, a 4 mm rear drain slot and 1.6 mm walls, for Philips Sonicare brush heads.