1
Organizers & storage
Stepped rack for craft paint bottles
A tiered display that holds 2 oz craft paint bottles and dropper bottles at an angle so labels face forward. Each pocket is 28 mm in diameter with 0.5 mm clearance and a 12 mm deep seat, rows rise 30 mm and lean back 15 degrees, and a 3 mm rear wall stops bottles being pushed off. The rack prints upside down or on its back with 1.6 mm walls and no supports. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| pockets per tier | 9 |
| bottle diameter | 28 mm |
| clearance | 0.5 mm |
| pocket depth | 12 mm |
| floor thickness under pocket | 6 mm |
| overall width | 270 mm |
| side wall thickness | 1.6 mm |
| rear wall thickness | 3 mm |
| rise per tier | 30 mm |
Example prompt
Create a three-tier paint bottle rack 270 mm wide with nine 28 mm diameter pockets per tier, 0.5 mm clearance, pockets 12 mm deep, rows stepping up 30 mm and leaning back 15 degrees, 3 mm rear wall, 1.6 mm side walls, no overhangs steeper than 45 degrees.
Fit notes
Your bottle diameter and paint count decide the pocket size and row length, so generation makes more sense than searching. Give SpeakCAD those two numbers and the depth of your shelf, preview the rack in the browser, ask for a mixed row of 36 mm dropper bottles, and download the STL once the colours all have a home.
Questions people ask about a stepped rack for craft paint bottles
A tiered display that holds 2 oz craft paint bottles and dropper bottles at an angle so labels face forward. Each pocket is 28 mm in diameter with 0.5 mm clearance and a 12 mm deep seat, rows rise 30 mm and lean back 15 degrees, and a 3 mm rear wall stops bottles being pushed off. The rack prints upside down or on its back with 1.6 mm walls and no supports.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More organizers & storage
RIDGID Pro Gear stack bit caddyReady-made, opens free. A caddy that drops into a RIDGID Pro Gear stack drawer and holds 40 hex bits in 6.6 mm pockets plus two 12 mm driver shafts.Framework 16 input-module trayReady-made, opens free. A tray that stores two Framework 16 input modules (numpad, RGB macropad) in 130 × 70 mm wells.Tiered thread spool rack for sewing tableReady-made, opens free. A stepped rack that holds sewing thread spools on angled pegs so the labels stay visible and the thread ends do not unravel into each other.21700 battery storage tray for 8 cells with polarity marksReady-made, opens free. A desktop tray that keeps eight 21700 lithium cells upright and separated, handy for vape, torch, power bank and e-bike battery projects.Bambu Lab AMS desiccant holder tray for silica beadsReady-made, opens free. A vented tray that clips into the unused floor space at the front of the Bambu Lab AMS, between the spool rollers, and holds about 60 g of loose silica gel b…Sony NP-FZ100 battery case for four batteriesReady-made, opens free. A pocketable case that holds four Sony NP-FZ100 batteries, the 38.7 x 22.7 x 51.7 mm pack used by the A7 IV, A7 III, A6700 and A1, in labelled bays with a fl…