1
Organizers & storage
Rode Wireless GO II charging tray
This is not a fixed STL. SpeakCAD generates the rode wireless go ii charging tray to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a charging tray for Rode Wireless GO II, three 45×19.5×25 mm pockets, 10×5 mm USB-C cable channels under each, 160×40 mm tray.
What a rode wireless go ii charging tray is
A desk tray that stands both transmitters and the receiver of a Rode Wireless GO II (each 44 × 45.3 × 18.5 mm) upright while they charge. The three pockets are 45 × 19.5 × 25 mm deep with 10 × 5 mm cable channels under each USB-C port, the unit clips face out, and the tray is 160 × 40 mm. Print flat in PLA or PETG.
The Rode Wireless PRO units are a little thicker, so they bind in these pockets. Open the ready-made model in SpeakCAD for free, change the pocket depth or any millimetre, then download the STL.
People also search
rode wireless go ii charging stand stlwireless go 2 holder 3d printrode go ii dockwireless go ii storage
Questions people ask about a rode wireless go ii charging tray
A desk tray that stands both transmitters and the receiver of a Rode Wireless GO II (each 44 × 45.3 × 18.5 mm) upright while they charge. The three pockets are 45 × 19.5 × 25 mm deep with 10 × 5 mm cable channels under each USB-C port, the unit clips face out, and the tray is 160 × 40 mm. Print flat in PLA or PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a charging tray for Rode Wireless GO II, three 45×19.5×25 mm pockets, 10×5 mm USB-C cable channels under each, 160×40 mm tray.
The Rode Wireless PRO units are a little thicker, so they bind in these pockets. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Joy-Con 2 desk organizer for four pairsAn upright organizer for eight Joy-Con 2 controllers (each about 116 mm long, 32 mm wide and 14 mm thick at the rail).French cleat screwdriver rack, 12 slotsA 12-slot French cleat screwdriver rack in two rows.Watch strap storage rack with numbered slotsA rack that stores spare smartwatch or quick-release straps flat and separated so silicone and leather bands do not stick together or curl.IKEA Pax clothes rail hook for bags and beltsA hook that hangs from the Komplement clothes rail inside an IKEA Pax wardrobe and holds handbags, belts, ties or a laundry bag without taking a hanger slot.IKEA SKÅDIS holder for Festool Domino tenonsA SKÅDIS box that holds Domino tenons in four labelled wells (4, 5, 6, 8 / 10 mm) with a 5 mm hook pair.IKEA BILLY extra-shelf book stopA stop that keeps paperbacks from sliding off a BILLY extra shelf (26 cm deep) when the case is on carpet.