1
Organizers & storage
Bosch L-Boxx 136 insert for GSR 12V drill kit
A replacement inlay for the Bosch Professional L-Boxx 136 (Sortimo L-BOXX 136) that cradles a GSR 12V-35 drill, two GBA 12V batteries, the GAL 12V charger and a 32-piece bit box in one layer. The Boxx interior is about 378 by 313 mm at 100 mm usable depth, so the inlay is split into three tiles that lock with dovetails and print on a 256 mm bed. Pockets have 3 mm clearance around each item, 2 mm floors and 2.5 mm dividing walls, with finger cut-outs so the drill lifts out by the grip. Print in PLA or PETG, flat, no supports. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| overall inlay depth (L-Boxx 136) | 311 mm |
| tile height | 60 mm |
| pocket floor thickness | 2 mm |
| wall / margin thickness | 2.5 mm |
| total clearance added to each pocket dimension | 3 mm |
| base dovetail width | 8 mm |
| extra width at tip (total) | 4 mm |
| protrusion depth | 4 mm |
| per-side female oversize (0.3mm total fit clearance) | 0.15 mm |
| number of tabs per seam | 6 |
Example prompt
Design a three-tile L-Boxx 136 inlay totalling 376 by 311 mm and 60 mm tall joined by 8 mm dovetails, with a 205 by 75 mm drill pocket, two 60 by 45 mm battery pockets, a 120 by 65 mm charger pocket and a 170 by 60 mm bit box pocket, 3 mm clearance, 2 mm floors, 2.5 mm walls.
Fit notes
Rigid foam inlays crumble and the factory insert only fits Bosch's own layout. In SpeakCAD you state which drill, batteries and bit case you carry, preview the tiled inlay in the browser without charge, move a pocket in the chat, then download the STL.
Questions people ask about a Bosch L-Boxx 136 insert for GSR 12V drill kit
A replacement inlay for the Bosch Professional L-Boxx 136 (Sortimo L-BOXX 136) that cradles a GSR 12V-35 drill, two GBA 12V batteries, the GAL 12V charger and a 32-piece bit box in one layer. The Boxx interior is about 378 by 313 mm at 100 mm usable depth, so the inlay is split into three tiles that lock with dovetails and print on a 256 mm bed. Pockets have 3 mm clearance around each item, 2 mm floors and 2.5 mm dividing walls, with finger cut-outs so the drill lifts out by the grip. Print in PLA or PETG, flat, no supports.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More organizers & storage
Charging cable organizer with wrap postsReady-made, opens free. A flat plate with staggered posts that lets you coil USB-C, Lightning and micro-USB cables in figure eights and park the connectors in labelled pockets so th…iPad and iPhone family charging station rack with cable slotsReady-made, opens free. A countertop rack with upright slots for two iPads and three iPhones, so the family devices charge in one place overnight.Gridfinity holder for Knipex Pliers Wrench and CobraReady-made, opens free. A 2 by 2 Gridfinity block, 83.5 by 83.5 mm, with four angled slots that hold a Knipex Pliers Wrench 180 and 250 and Cobra 180 and 250 jaws-down so the handle…Whiskas and Felix cat food pouch dispenser boxReady-made, opens free. A gravity dispenser that stacks wet food pouches flat and feeds one from the bottom, so a 40-pouch box of Whiskas, Felix or Sheba lives on the shelf instead…Gridfinity 1×1 bin for SD, microSD and CFexpressReady-made, opens free. A 1×1 Gridfinity bin (41.5 × 41.5 mm, 3 units tall) that stands a CFexpress Type B card, two SD cards and two microSD cards on edge.Grease-gun coupler wall holderReady-made, opens free. A wall hook that parks a grease-gun coupler and a spare Zerk cap, 20 mm saddle and a 8 mm cap well.