1
Organizers & storage
French cleat rack for Irwin Quick-Grip clamps
This is not a fixed STL. SpeakCAD generates the french cleat rack for irwin quick-grip clamps to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a French cleat Quick-Grip clamp rack, 420 mm long, six 10 mm wide 30 mm deep slots on a 70 mm pitch, 45 degree cleat for 19 mm plywood.
What a french cleat rack for irwin quick-grip clamps is
A rack for six Irwin Quick-Grip one-handed bar clamps. The bars, about 19 × 6 mm on the medium-duty range, drop into 10 mm wide, 30 mm deep slots on a 70 mm pitch so the pistol grips clear each other, and the fixed jaw sits on the rack. It is 420 mm long with a 45 degree cleat for 19 mm plywood. Print on its back in PETG.
Heavy-duty Quick-Grips have a thicker bar that jams in 10 mm slots. The ready-made rack opens free in SpeakCAD; edit any millimetre in the viewer or the chat, then download the STL.
People also search
irwin quick grip clamp rackquick grip clamp holder stlone handed clamp storageclamp rack 3d print
Questions people ask about a french cleat rack for irwin quick-grip clamps
A rack for six Irwin Quick-Grip one-handed bar clamps. The bars, about 19 × 6 mm on the medium-duty range, drop into 10 mm wide, 30 mm deep slots on a 70 mm pitch so the pistol grips clear each other, and the fixed jaw sits on the rack. It is 420 mm long with a 45 degree cleat for 19 mm plywood. Print on its back in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a French cleat Quick-Grip clamp rack, 420 mm long, six 10 mm wide 30 mm deep slots on a 70 mm pitch, 45 degree cleat for 19 mm plywood.
Heavy-duty Quick-Grips have a thicker bar that jams in 10 mm slots. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Grease-gun coupler wall holderA wall hook that parks a grease-gun coupler and a spare Zerk cap, 20 mm saddle and a 8 mm cap well.Milwaukee Packout Low-Profile Organizer dividersA set of dividers that split a Packout Low-Profile Organizer (about 380 × 250 mm) into six 120 × 80 mm wells for fittings.Nintendo Switch game case shelf holder for 10 casesA shelf holder for ten Nintendo Switch or Switch 2 retail cases (170 × 105 × 11 mm) standing spine-out like books.French cleat holder for a Japanese ryoba pull sawA holder for a 240 mm ryoba or kataba pull saw such as the Gyokucho Razor, whose blade is about 0.6 mm thick and 110 mm tall.Stepped rack for craft paint bottlesA tiered display that holds 2 oz craft paint bottles and dropper bottles at an angle so labels face forward.KitchenAid attachment holder rack for pasta roller and grinderA rack that stores KitchenAid power hub attachments upright by their drive shafts so the pasta roller, fettuccine cutter and food grinder stop rattling loose…