1
Organizers & storage
IKEA SKADIS tape roll holder for 76 mm cores
This is not a fixed STL. SpeakCAD generates the ikea skadis tape roll holder for 76 mm cores to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create an IKEA SKADIS tape holder arm, 70 mm half-round, 55 mm long, 5 mm end lip, for 76 mm tape cores, two pegs 40 mm apart.
What a ikea skadis tape roll holder for 76 mm cores is
A SKADIS arm for duct tape, masking tape and painter's tape on the standard 76 mm (3 inch) core. The half-round arm is 70 mm across and 55 mm long, enough for one 48 mm roll plus a narrow one, with a 5 mm end lip so rolls do not walk off. Two pegs 40 mm apart fit the 5 × 15 mm SKADIS slots. Print upright in PETG with 4 walls.
Electrical tape uses a smaller 32 mm core and falls off this arm; ask the chat for a second, thinner arm. The model opens free in SpeakCAD, any millimetre can be changed in the viewer or the chat, then the STL is yours.
People also search
skadis tape holderduct tape holder wall stlmasking tape roll holder 3d printtape dispenser pegboard
Questions people ask about a ikea skadis tape roll holder for 76 mm cores
A SKADIS arm for duct tape, masking tape and painter's tape on the standard 76 mm (3 inch) core. The half-round arm is 70 mm across and 55 mm long, enough for one 48 mm roll plus a narrow one, with a 5 mm end lip so rolls do not walk off. Two pegs 40 mm apart fit the 5 × 15 mm SKADIS slots. Print upright in PETG with 4 walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create an IKEA SKADIS tape holder arm, 70 mm half-round, 55 mm long, 5 mm end lip, for 76 mm tape cores, two pegs 40 mm apart.
Electrical tape uses a smaller 32 mm core and falls off this arm; ask the chat for a second, thinner arm. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Bambu Lab AMS desiccant holder tray for silica beadsA vented tray that clips into the unused floor space at the front of the Bambu Lab AMS, between the spool rollers, and holds about 60 g of loose silica gel b…Makita MAKPAC Type 2 impact-driver insertA Type 2 MAKPAC insert that holds an 18V LXT impact driver, a battery, and a 10-bit rail.IKEA TROFAST bin-lid clip pairA pair of clips that keep a TROFAST bin lid (about 42 × 30 cm) from sliding off in a car or under a bed.Elegoo Neptune 4 Pro scraper holderA scraper holder that bolts to the side of a Neptune 4 Pro upright with M5 T-nuts, so the spatula and the pliers stay by the printer.French cleat hanger for a 184 mm circular sawA French cleat hanger for a 7-1/4 inch (184 mm) circular saw that hangs it by the base shoe, blade guard facing the wall.AA and AAA battery storage box with lidA two-level case that stores fresh cells in rows and keeps the used ones separate.