IKEA Skadis hook for Knipex Cobra and combination pliers
A double-prong Skadis hook that hangs a Knipex Cobra 250 or combination pliers by the open jaws so the handles dangle in reach. The back plate uses the IKEA Skadis pattern, 5 mm wide by 15 mm tall slots on a 40 mm pitch, with two hooked tabs that drop in and lock when the plate is pushed down. The prongs are 8 mm round, 45 mm long with a 5 mm upturned tip and 35 mm apart to suit jaw widths from 30 to 50 mm. Print it lying on its back in PETG so the layers run along the prongs; 3 mm plate thickness.
Generic Skadis hooks are too short or too weak for 500 g of steel pliers. In SpeakCAD you describe the tool, preview the hook in the browser without paying, ask for a triple prong or a Wall Control version in the chat, and download the STL.
Design a Skadis pegboard hook with a 40 by 60 mm back plate 3 mm thick carrying two locking tabs 5 by 15 mm on a 40 mm vertical pitch, two 8 mm round prongs 45 mm long spaced 35 mm apart with 5 mm upturned tips, and a 3 mm fillet where each prong meets the plate.