Google Pixel 9 Pro XL shower phone holder suction
A splash-tolerant cradle that holds a Google Pixel 9 Pro XL (162.8 x 76.6 x 8.5 mm) on shower tiles for podcasts and playlists. The pocket is 164.5 x 78.5 x 11 mm so a thin case fits, tilted back 20 degrees for viewing, with four 4 mm drain slots in the floor and an open front so drips run off rather than pool at the speaker. Two 45 mm suction cups with 8 mm stems press into keyed pockets on the back; the part prints on its back with 2.4 mm walls.
Downloaded shower holders are drawn for a generic phone and leave a tall Pixel top-heavy. In SpeakCAD you describe the exact phone, the suction cups you have and how much tilt you want, preview the holder free in the browser, adjust drainage or the pocket depth in the chat, then download the STL and print it in PETG.
Design a shower phone holder for a Google Pixel 9 Pro XL with a 164.5 x 78.5 x 11 mm pocket tilted back 20 degrees, four 4 mm drain slots, an open 40 mm front section, two keyed pockets for 45 mm suction cups with 8 mm stems and 2.4 mm walls.