1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
IKEA SKÅDIS phone charging shelf
This is not a fixed STL. SpeakCAD generates the ikea skådis phone charging shelf to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a ikea skådis phone charging shelf is
A 20 mm SKÅDIS shelf that holds a phone at 15 degrees with a 12 mm USB-C slot so a charging brick lives on the pegboard. The plate is 90 × 70 × 20 mm with two official hooks. Print in PETG with 2 mm walls.
Knipex and Wera SKÅDIS hooks are for tools. Describe phone thickness in SpeakCAD, preview the shelf in the browser for free, then download the STL.
Example prompt
Create a SKÅDIS phone charging shelf 90×70×20 mm at 15 degrees, 12 mm USB-C slot, two SKÅDIS hooks, 2 mm PETG.
People also search
skadis phone shelf stlikea skadis charging shelf 3d printskadis phone dockskadis usb-c shelf 3d model
Questions people ask about a ikea skådis phone charging shelf
A 20 mm SKÅDIS shelf that holds a phone at 15 degrees with a 12 mm USB-C slot so a charging brick lives on the pegboard. The plate is 90 × 70 × 20 mm with two official hooks. Print in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a SKÅDIS phone charging shelf 90×70×20 mm at 15 degrees, 12 mm USB-C slot, two SKÅDIS hooks, 2 mm PETG.
Knipex and Wera SKÅDIS hooks are for tools. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Under-desk headphone holder with screw mountA curved hanger that screws to the underside of a desk so headphones hang within reach.Elgato Stream Deck XL low-profile angled standA single-piece stand that replaces the tall stock cradle of the Elgato Stream Deck XL with a slimmer 30 degree wedge.ZSA Moonlander tenting legs setA set of four screw-in tenting legs for a ZSA Moonlander that replace the stock 8 mm feet with 15, 25 and 40 mm options.NuPhy Air75 V3 tenting feetA set of 8 degree tenting feet that replace Air75 V3 stock feet, 20 × 10 × 8 mm with the official pin.Studio Display USB-C hub shelfA 18 mm shelf that hangs from the Studio Display's rear Thunderbolt cable and holds a USB-C hub so Ethernet and SD do not hang off the single upstream port.IKEA SKOGSTA table cable-clip pairA pair of clips that grab a SKOGSTA table apron (about 30 mm) and park a laptop charger so it does not hang in the walkway.