1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Logitech MX Master 4 charging-puck stand
This is not a fixed STL. SpeakCAD generates the logitech mx master 4 charging-puck stand to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a logitech mx master 4 charging-puck stand is
A stand that holds a Logitech MX Master 4 (about 126 × 84 × 51 mm) on its USB-C or wireless puck at 10 degrees so the thumb rest stays up. The well is 86 × 54 mm with 0.4 mm clearance, a 14 mm cable slot at the front, and a 90 × 70 mm base. Print in one piece in PLA.
Master 3S stands leave the Master 4's new hump rocking. Tell SpeakCAD which puck you use, preview the stand in the browser at no cost, then download the STL.
Example prompt
Design an MX Master 4 stand 90×70×30 mm with an 86×54 mm well at 10 degrees, 0.4 mm clearance, 14 mm front cable slot and 1.6 mm walls.
People also search
mx master 4 stand stllogitech mx master 4 charger 3d printmx master 4 desk dockmx master 4 mouse stand 3d model
Questions people ask about a logitech mx master 4 charging-puck stand
A stand that holds a Logitech MX Master 4 (about 126 × 84 × 51 mm) on its USB-C or wireless puck at 10 degrees so the thumb rest stays up. The well is 86 × 54 mm with 0.4 mm clearance, a 14 mm cable slot at the front, and a 90 × 70 mm base. Print in one piece in PLA.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design an MX Master 4 stand 90×70×30 mm with an 86×54 mm well at 10 degrees, 0.4 mm clearance, 14 mm front cable slot and 1.6 mm walls.
Master 3S stands leave the Master 4's new hump rocking. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
iPad Pro 13-inch M4 folio desk easelA low easel that holds a 13-inch iPad Pro M4 (about 281 × 215 × 5.1 mm) in its Smart Folio at 25 degrees for drawing, with a 218 mm ledge, a 10 mm Apple Penc…IKEA SKOGSTA table cable-clip pairA pair of clips that grab a SKOGSTA table apron (about 30 mm) and park a laptop charger so it does not hang in the walkway.Framework Desktop under-desk trayA ventilated tray that clamps a Framework Desktop (about 190 × 190 × 75 mm) under a 15–36 mm desk so the rear exhaust stays open.AirPods Pro 2 case charging stand for MagSafe puckA small stand that holds an Apple MagSafe puck at 70 degrees and cradles the AirPods Pro 2 case (60.6 x 45.2 x 21.7 mm) against it, aligning the case coil wi…Galaxy Tab S10 Ultra easel standAn easel that holds a Galaxy Tab S10 Ultra (about 326 × 208 × 5.4 mm) at 20 or 50 degrees for drawing, with a 210 mm ledge 10 mm deep and a folding 6 mm pin…Elgato Facecam MK.2 privacy shutterA sliding shutter that covers a Facecam MK.2 lens, 30 × 18 × 6 mm with a 1 mm track.