1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Keychron V1 Max tenting feet
This is not a fixed STL. SpeakCAD generates the keychron v1 max tenting feet to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a keychron v1 max tenting feet is
A set of screw-in tenting feet for a V1 Max that replace the stock 8 mm feet with 12, 20 and 30 mm options. Each foot is M4, 16 mm across, with a 10 mm rubber-foot recess. Print two of each height in PETG.
The Q8 Max split rest is a different board. Describe the tenting angle in SpeakCAD, preview the feet in the browser without paying, then download the STL.
Example prompt
Model V1 Max tenting feet, M4, 16 mm diameter, heights 12, 20 and 30 mm, 10 mm foot recess, PETG, two of each.
People also search
keychron v1 max feet stlv1 max tenting 3d printkeychron v1 max legsv1 max tenting kit 3d model
Questions people ask about a keychron v1 max tenting feet
A set of screw-in tenting feet for a V1 Max that replace the stock 8 mm feet with 12, 20 and 30 mm options. Each foot is M4, 16 mm across, with a 10 mm rubber-foot recess. Print two of each height in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model V1 Max tenting feet, M4, 16 mm diameter, heights 12, 20 and 30 mm, 10 mm foot recess, PETG, two of each.
The Q8 Max split rest is a different board. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Magic Trackpad 2 angled desk wedgeA 8 degree wedge under a Magic Trackpad 2 / USB-C Trackpad (about 160 × 115 mm) so the front edge matches a Magic Keyboard.Dyson Corrale HS07 charger dockA dock that holds a Dyson Corrale HS07 (about 45 × 32 mm closed) on its magnetic charger so the plates do not rest on the glass.Samsung Galaxy S25 Ultra desk standA stand that holds a Galaxy S25 Ultra (about 163 × 79 × 8.2 mm) at 55 degrees with a 14 mm USB-C slot and a 7.2 mm S Pen well.iPhone 16 Pro bedside MagSafe charging stand for StandByA nightstand stand that holds an Apple MagSafe puck at 65 degrees so an iPhone 16 Pro (149.6 x 71.5 x 8.25 mm) charges in landscape and shows the StandBy clock.Nothing Phone (3) Glyph desk standA clear-back-friendly stand for a Nothing Phone (3) (about 160 × 76 × 8.3 mm) that holds the phone at 65 degrees so the Glyph interface stays visible.Midi Fighter 3D angled standA 20 degree stand for a Midi Fighter 3D with a 14 mm USB slot and 10 mm rubber-foot recesses.