1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Thunderbolt 5 dock MacBook under-stand
This is not a fixed STL. SpeakCAD generates the thunderbolt 5 dock macbook under-stand to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a thunderbolt 5 dock macbook under-stand is
A 30 mm stand that lifts a closed MacBook Air or 14-inch Pro and hides a Thunderbolt 5 dock (about 200 × 80 × 28 mm) underneath so the single cable is the only thing on the desk. The span is 320 × 240 × 30 mm with a 210 × 85 mm dock well, a 22 mm rear cable gap, and four 12 mm foot posts. Print as two PETG halves, 2.4 mm walls.
A USB-C hub tray is too shallow for a TB5 brick. Describe the dock in SpeakCAD, preview the stand in the browser for free, then download the STL.
Example prompt
Create a Thunderbolt 5 dock under-stand 320×240×30 mm, 210×85 mm dock well, 22 mm rear gap, four 12 mm foot posts, two PETG halves, 2.4 mm walls.
People also search
thunderbolt 5 dock stand stltb5 macbook under stand 3d printthunderbolt 5 dock traymacbook tb5 dock shelf 3d model
Questions people ask about a thunderbolt 5 dock macbook under-stand
A 30 mm stand that lifts a closed MacBook Air or 14-inch Pro and hides a Thunderbolt 5 dock (about 200 × 80 × 28 mm) underneath so the single cable is the only thing on the desk. The span is 320 × 240 × 30 mm with a 210 × 85 mm dock well, a 22 mm rear cable gap, and four 12 mm foot posts. Print as two PETG halves, 2.4 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a Thunderbolt 5 dock under-stand 320×240×30 mm, 210×85 mm dock well, 22 mm rear gap, four 12 mm foot posts, two PETG halves, 2.4 mm walls.
A USB-C hub tray is too shallow for a TB5 brick. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
iPhone 17 Air MagSafe wallet standA slim nightstand stand that an iPhone 17 Air (about 147 × 72 × 5.6 mm) snaps onto at 60 degrees for StandBy, with a 4 mm pocket behind the MagSafe disc for…Suunto Vertical charger-cable standA stand that holds a Suunto Vertical on its pogo cable at 25 degrees, 50 mm nest.Mac Studio M4 under-desk trayA ventilated tray that clamps a Mac Studio M4 (about 197 × 197 × 95 mm) under a 15–36 mm desk so the 120 mm rear exhaust stays open.MacBook Air 15 M4 MagSafe right-side clipA clip that hangs from the right edge of a 15-inch MacBook Air M4 and holds the MagSafe 3 cable at chassis height so the tip does not scratch the aluminium.Keychron V1 Max tenting feetA set of screw-in tenting feet for a V1 Max that replace the stock 8 mm feet with 12, 20 and 30 mm options.Sloped wrist rest for mechanical keyboardA palm rest that matches the front height of a mechanical keyboard so your wrists stay level while typing.