1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
MacBook Pro 16 M4 HDMI hub under-stand
This is not a fixed STL. SpeakCAD generates the macbook pro 16 m4 hdmi hub under-stand to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a macbook pro 16 m4 hdmi hub under-stand is
A 24 mm shelf for a 16-inch MacBook Pro M4 (about 16.8 mm closed, 356 mm wide) that holds a Thunderbolt HDMI hub flush under the chassis. The plate is 280 × 100 × 24 mm with a 110 × 30 mm hub well and a 22 mm rear cable gap so HDMI and SD stay off the desk. Four 12 mm posts match the 16-inch foot pattern. Print as two PETG halves, 2.4 mm walls.
A 14-inch under-stand leaves 40 mm of the 16-inch hanging. Tell SpeakCAD the foot spacing you measured, preview the stand in the browser without paying, then download the STL.
Example prompt
Model a MacBook Pro 16 M4 HDMI hub under-stand 280×100×24 mm, 110×30 mm hub well, 22 mm rear cable gap, four 12 mm foot posts, two PETG halves, 2.4 mm walls.
People also search
macbook pro 16 hub stand stl16 inch macbook pro hdmi tray 3d printm4 pro 16 dongle shelfmacbook pro 16 under stand 3d model
Questions people ask about a macbook pro 16 m4 hdmi hub under-stand
A 24 mm shelf for a 16-inch MacBook Pro M4 (about 16.8 mm closed, 356 mm wide) that holds a Thunderbolt HDMI hub flush under the chassis. The plate is 280 × 100 × 24 mm with a 110 × 30 mm hub well and a 22 mm rear cable gap so HDMI and SD stay off the desk. Four 12 mm posts match the 16-inch foot pattern. Print as two PETG halves, 2.4 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a MacBook Pro 16 M4 HDMI hub under-stand 280×100×24 mm, 110×30 mm hub well, 22 mm rear cable gap, four 12 mm foot posts, two PETG halves, 2.4 mm walls.
A 14-inch under-stand leaves 40 mm of the 16-inch hanging. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Pro Display XDR stand cable tidyA tidy that clips onto the Pro Display XDR stand foot and gathers Thunderbolt and power into a 18 mm channel so they do not show from the front.Bose QC Ultra Earbuds charging wellA well that parks a QC Ultra Earbuds case (about 66 × 30 × 27 mm) at 15 degrees so the lid faces up on a nightstand.Slim bookend pair with anti-slip baseA pair of L-shaped bookends that keep manuals and notebooks upright on a desk or open shelf.Pixel 10 Pro desk stand with USB-C passthroughA low desk cradle for a Google Pixel 10 Pro (about 153 × 72 × 8.5 mm) that holds the phone at 55 degrees with a 14 mm rear slot so a USB-C cable stays plugge…COROS Vertix 2S charger dockA dock that holds a Vertix 2S on its clip at 20 degrees, 54 mm nest.Studio Display tilt-stop wedgeA 12 mm wedge that sits under a Studio Display stand so the screen cannot droop below 10 degrees on a polished desk.