1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Studio Display USB-C hub shelf
This is not a fixed STL. SpeakCAD generates the studio display usb-c hub shelf to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a studio display usb-c hub shelf is
A 18 mm shelf that hangs from the Studio Display's rear Thunderbolt cable and holds a USB-C hub so Ethernet and SD do not hang off the single upstream port. The plate is 160 × 70 × 18 mm with a 90 × 26 mm hub well and a 14 mm clip that grabs the official braided cable. Print in PETG with 2 mm walls.
A hub on the desk walks every time you plug in. In SpeakCAD you name the hub, preview the shelf in the browser without paying, then download the STL.
Example prompt
Model a Studio Display USB-C hub shelf 160×70×18 mm, 90×26 mm hub well, 14 mm cable clip, 2 mm PETG walls.
People also search
studio display hub shelf stlstudio display usb-c hub 3d printapple studio display dongle traystudio display hub holder 3d model
Questions people ask about a studio display usb-c hub shelf
A 18 mm shelf that hangs from the Studio Display's rear Thunderbolt cable and holds a USB-C hub so Ethernet and SD do not hang off the single upstream port. The plate is 160 × 70 × 18 mm with a 90 × 26 mm hub well and a 14 mm clip that grabs the official braided cable. Print in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a Studio Display USB-C hub shelf 160×70×18 mm, 90×26 mm hub well, 14 mm cable clip, 2 mm PETG walls.
A hub on the desk walks every time you plug in. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Keychron Q8 Max split palm restA split palm rest for a Q8 Max Alice with two 8 × 2 mm magnet pockets matching the case.Mac mini M4 HDMI and SD dongle trayA tray that sits beside a Mac mini M4 (about 127 × 127 × 50 mm) and holds an HDMI/SD dongle plus two SD cards so they do not dangle from the rear ports.IKEA KALLAX cube 50 mm cable passA 50 mm pass-through for a KALLAX cube used as a printer or game stand so power can exit the back without a raw hole.Framework 16 speaker-module stand feetFeet that lift a Framework 16 8 mm when the speaker modules are in so the down-firing drivers clear a desk.Samsung Galaxy Z Flip 6 desk stand for Flex modeA desk dock for the Samsung Galaxy Z Flip 6 that cradles the lower half so the phone sits in Flex mode with the top screen angled toward you for video calls…iPad mini 7 bedside reading standA bedside stand that holds an iPad mini 7 (about 195 × 135 × 6.3 mm) at 40 degrees in portrait with a 14 mm USB-C slot and a 8 mm lip so a Folio case does no…