1
Desk & office
HomePod 2nd gen bookshelf isolation stand
A 20 mm isolation stand under a full-size HomePod 2nd gen (about 168 mm diameter, 142 mm tall) so the bass does not buzz a bookshelf. The pad is 170 mm across with a 4 mm TPU face, a 12 mm PLA core, and a 16 mm cable notch at the back. Print the core in PLA and the face in TPU, or all TPU. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month, where the first 3 small changes are free.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| Outer diameter | 170 mm |
| Total stand height | 20 mm |
| Rim wall thickness | 2 mm |
| Floor (TPU face) thickness | 4 mm |
| Notch width | 16 mm |
| Notch height (from top down) | 12 mm |
Example prompt
Design a HomePod 2nd-gen isolation stand 170 mm diameter, 20 mm tall, 4 mm TPU face, 16 mm cable notch, 2 mm walls.
Fit notes
A HomePod mini shelf is too small and the speaker walks. Tell SpeakCAD the shelf depth, preview the stand in the browser, then download the STL.
Questions people ask about a HomePod 2nd gen bookshelf isolation stand
A 20 mm isolation stand under a full-size HomePod 2nd gen (about 168 mm diameter, 142 mm tall) so the bass does not buzz a bookshelf. The pad is 170 mm across with a 4 mm TPU face, a 12 mm PLA core, and a 16 mm cable notch at the back. Print the core in PLA and the face in TPU, or all TPU.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More desk & office
Suunto Vertical charger-cable standReady-made, opens free. A stand that holds a Suunto Vertical on its pogo cable at 25 degrees, 50 mm nest.MacBook Air 13-inch M4 vertical dockReady-made, opens free. A vertical dock that holds a 13-inch MacBook Air M4 (about 11.3 mm closed, 304 mm wide) on its side so MagSafe and the two Thunderbolt ports stay clear.Mac mini M4 HDMI and SD dongle trayReady-made, opens free. A tray that sits beside a Mac mini M4 (about 127 × 127 × 50 mm) and holds an HDMI/SD dongle plus two SD cards so they do not dangle from the rear ports.Pen cup with sloped compartmentsReady-made, opens free. A desk pen holder divided into three angled compartments so pens, markers and scissors each lean forward and stay easy to grab.Samsung Galaxy Z Flip 6 desk stand for Flex modeReady-made, opens free. A desk dock for the Samsung Galaxy Z Flip 6 that cradles the lower half so the phone sits in Flex mode with the top screen angled toward you for video calls…Garmin Fenix 8 charger cable dockReady-made, opens free. A desk dock that holds a Garmin Fenix 8 (51 mm case) face-out while the official clip charger clamps the back.