1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
AirPods 4 ANC desk charging stand
This is not a fixed STL. SpeakCAD generates the airpods 4 anc desk charging stand to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a airpods 4 anc desk charging stand is
A small desk stand that holds an AirPods 4 ANC case (about 50 × 50 × 21 mm) at 20 degrees with the lid able to open. The well is 52 × 22 mm with 0.4 mm clearance, a 12 mm Lightning-or-USB-C slot at the back, and a 8 mm front lip so the case does not slide. The base is 70 × 55 mm and prints in one piece in PLA.
AirPods Pro 2 stands are too tall for the squarer AirPods 4 case. Tell SpeakCAD which case you own, preview the stand in the browser at no cost, then download the STL.
Example prompt
Design an AirPods 4 ANC desk stand 70×55×28 mm with a 52×22 mm well at 20 degrees, 0.4 mm clearance, 12 mm rear cable slot, 8 mm front lip and 1.6 mm walls.
People also search
airpods 4 stand stlairpods 4 anc charging stand 3d printairpods 4 desk dockairpods 4 case holder 3d model
Questions people ask about a airpods 4 anc desk charging stand
A small desk stand that holds an AirPods 4 ANC case (about 50 × 50 × 21 mm) at 20 degrees with the lid able to open. The well is 52 × 22 mm with 0.4 mm clearance, a 12 mm Lightning-or-USB-C slot at the back, and a 8 mm front lip so the case does not slide. The base is 70 × 55 mm and prints in one piece in PLA.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design an AirPods 4 ANC desk stand 70×55×28 mm with a 52×22 mm well at 20 degrees, 0.4 mm clearance, 12 mm rear cable slot, 8 mm front lip and 1.6 mm walls.
AirPods Pro 2 stands are too tall for the squarer AirPods 4 case. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
iPad Pro 13-inch M4 folio desk easelA low easel that holds a 13-inch iPad Pro M4 (about 281 × 215 × 5.1 mm) in its Smart Folio at 25 degrees for drawing, with a 218 mm ledge, a 10 mm Apple Penc…IKEA SKOGSTA table cable-clip pairA pair of clips that grab a SKOGSTA table apron (about 30 mm) and park a laptop charger so it does not hang in the walkway.Framework Desktop under-desk trayA ventilated tray that clamps a Framework Desktop (about 190 × 190 × 75 mm) under a 15–36 mm desk so the rear exhaust stays open.AirPods Pro 2 case charging stand for MagSafe puckA small stand that holds an Apple MagSafe puck at 70 degrees and cradles the AirPods Pro 2 case (60.6 x 45.2 x 21.7 mm) against it, aligning the case coil wi…Framework Laptop 13 vertical dockA vertical dock that holds a Framework Laptop 13 (about 16 mm thick closed, 297 mm wide) on its side so the expansion cards stay accessible.Elgato Facecam MK.2 privacy shutterA sliding shutter that covers a Facecam MK.2 lens, 30 × 18 × 6 mm with a 1 mm track.