1
Desk & office
Kindle Paperwhite desk reading stand with USB-C cable slot
A reclining stand that holds a Kindle Paperwhite (176.7 x 127.6 x 7.8 mm for the 2024 model, 174.2 x 124.6 x 8.1 mm for the 2021) at 60 degrees for hands-free reading at a desk or kitchen table. The 9 mm channel across the base has a 25 mm gap at the centre for the USB-C plug so it charges while you read, a 12 mm lip stops it sliding, and the 130 x 80 mm base with 3 mm walls stays put on the table. It prints upright without supports. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| base width (X) | 130 mm |
| base depth (Y) | 80 mm |
| base thickness (Z) | 15 mm |
| channel width (X-Y cross section, along Y depth of cut) | 9 mm |
| how deep the channel is cut into base top | 12 mm |
| Y position of channel center from front edge | 20 mm |
| lip height above base top | 12 mm |
| wall thickness of lip | 3 mm |
| width of cable gap | 25 mm |
| wall thickness | 3 mm |
Example prompt
Design a reading stand for a Kindle Paperwhite with a 9 mm wide, 12 mm deep channel across a 130 x 80 x 15 mm base, a 25 mm central cable gap, a 60 degree backrest 100 mm tall, a 12 mm front lip and 3 mm walls.
Fit notes
Kindle generations differ by a few millimetres and a fabric cover adds more, so a downloaded stand is either loose or too tight. In SpeakCAD you describe your Kindle or Kobo and its cover, preview the stand in the browser, refine the recline angle in the chat, then download the STL.
Questions people ask about a Kindle Paperwhite desk reading stand with USB-C cable slot
A reclining stand that holds a Kindle Paperwhite (176.7 x 127.6 x 7.8 mm for the 2024 model, 174.2 x 124.6 x 8.1 mm for the 2021) at 60 degrees for hands-free reading at a desk or kitchen table. The 9 mm channel across the base has a 25 mm gap at the centre for the USB-C plug so it charges while you read, a 12 mm lip stops it sliding, and the 130 x 80 mm base with 3 mm walls stays put on the table. It prints upright without supports.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More desk & office
MacBook Pro 14 M4 HDMI hub under-standReady-made, opens free. A 22 mm shelf that sits under a 14-inch MacBook Pro M4 (about 15.5 mm closed, 312 mm wide) and parks a 6-port HDMI/SD hub so the left Thunderbolt ports stay…Vertical laptop stand for closed-lid dockingReady-made, opens free. A weighted-look holder that stores a closed laptop on its edge beside a monitor.Samsung Galaxy Watch charger puck holder for deskReady-made, opens free. An upright holder for the round Samsung Galaxy Watch wireless charging puck, so a Galaxy Watch 6 or 7 sits on its side charging instead of lying face down on…Nothing Phone (3) Glyph desk standReady-made, opens free. A clear-back-friendly stand for a Nothing Phone (3) (about 160 × 76 × 8.3 mm) that holds the phone at 65 degrees so the Glyph interface stays visible.Govee TV Backlight 3 camera hoodReady-made, opens free. A hood that shades the Backlight 3 camera from a downlight so the colours stay true, 40 × 30 × 20 mm with a 12 mm lens well.Raspberry Pi 500+ vertical standReady-made, opens free. A vertical stand that holds a Pi 500+ on its side so the ports stay clear, 18 × 290 mm slot.