1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Govee TV Backlight 3 camera hood
This is not a fixed STL. SpeakCAD generates the govee tv backlight 3 camera hood to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a govee tv backlight 3 camera hood is
A hood that shades the Backlight 3 camera from a downlight so the colours stay true, 40 × 30 × 20 mm with a 12 mm lens well. Print in PLA, matte black if you can.
A ceiling spot washes the camera. Describe the TV thickness, preview the hood in SpeakCAD for free, then download the STL.
Example prompt
Model a Backlight 3 camera hood 40×30×20 mm with a 12 mm lens well, 1.2 mm walls.
People also search
govee backlight 3 hood stlgovee camera shade 3d printtv backlight 3 camera covergovee enclosure 3 hood 3d model
Questions people ask about a govee tv backlight 3 camera hood
A hood that shades the Backlight 3 camera from a downlight so the colours stay true, 40 × 30 × 20 mm with a 12 mm lens well. Print in PLA, matte black if you can.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a Backlight 3 camera hood 40×30×20 mm with a 12 mm lens well, 1.2 mm walls.
A ceiling spot washes the camera. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
iPhone 17 Air MagSafe wallet standA slim nightstand stand that an iPhone 17 Air (about 147 × 72 × 5.6 mm) snaps onto at 60 degrees for StandBy, with a 4 mm pocket behind the MagSafe disc for…COROS Vertix 2S charger dockA dock that holds a Vertix 2S on its clip at 20 degrees, 54 mm nest.Studio Display tilt-stop wedgeA 12 mm wedge that sits under a Studio Display stand so the screen cannot droop below 10 degrees on a polished desk.MacBook Air 15 M4 MagSafe right-side clipA clip that hangs from the right edge of a 15-inch MacBook Air M4 and holds the MagSafe 3 cable at chassis height so the tip does not scratch the aluminium.Keychron V1 Max tenting feetA set of screw-in tenting feet for a V1 Max that replace the stock 8 mm feet with 12, 20 and 30 mm options.Sloped wrist rest for mechanical keyboardA palm rest that matches the front height of a mechanical keyboard so your wrists stay level while typing.